7Setup and Reset
7.1HUB
Configure the settings to use the HUB function on the product.
z
z
Refer to "2.1 About "HUB Monitor"" for details about how to use the HUB function.
To open the HUB settings screen, press HUB on the stand.
7.1.1Auto Wireless Detection
If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal and change the input source to Wireless USB mode.
Configuring Auto Wireless Detection
1Press [m ] on the product.
2Press [
] to move to SETUP&RESET and press [
] on the product.
3Press [
] to move to HUB and press [
] on the product.
4Press [ 
] to move to Auto Wireless Detection and press [
] on the product. The following screen will appear.
HUB |
|
|
|
| |
|
|
|
|
|
|
| Auto Wireless Detection |
| Off |
|
|
| Wireless Connection |
| On |
|
|
|
|
|
| ||
| USB Connection |
| Disconnected |
|
|
| Analog |
| Disconnected |
|
|
| HDMI |
| Disconnected |
|
|
| USB Super Charging |
| 2II |
|
|
| Wireless ID |
| |||
|
|
|
|
| |
| Return | Adjust | Enter | ||
zOff: Deactivate the auto wireless detection mode.
zOn: Automatically detect a Wireless USB signal and change the input source to Wireless USB mode.
5Press [
] to move to the option you want and press the [
].
6The selected option will be applied.
7.1.2Wireless Connection
You can view the status of the Wireless USB connection between the product and a PC. Select the Wireless Connection option. The input source will change to Wireless USB mode.
z
z
The connection status will be shown even when the input source is not Wireless USB mode.
Selecting Wireless Connection when a Wireless USB connection is established will change the input source to Wireless USB mode.
7 Setup and Reset 67