Using the Radio, Loading a Cassette Tape

PHONES — connect a pair of headphones (not supplied) with

a1/8-inch (3.5-mm) plug. Your lo- cal RadioShack store carries a wide selection of headphones.

Insert the headphones’ 1/8-inch (3.5-mm) plug into the cassette recorder’s PHONES jack.

Note: Connecting headphones automatically disconnects the built-in speaker.

TONE HIGH/LOW — slide TONE to high to enhance the treble sound or to LOW to enhance the bass sound.

FUNCTION RADIO OFF/TAPE/RADIO — slide to turn the radio on and off and to use the cassette functions.

PLAY

BAND AM/FM/FM STEREO — slide to se- lect the band. Select FM STEREO to hear sound in stereo. If the reception using FM STEREO is weak, select FM instead. The sound will be monaural, but the reception should improve.

TUNING — rotate to select the desired AM or FM station.

Antenna — to get the best FM re- ception, fully extend the telescoping antenna.

The AM antenna is built-in. For the best AM reception, rotate the radio.

VOLUME — rotate to adjust the sound volume.

The radio/cassette player’s automatic level control circuitry automatically adjusts the recording level.

Adjusting VOLUME does not affect the recording.

PAUSE — press to temporarily stop a tape. Press again to resume play, recording, rewind- ing, or fast-forwarding.

STOP/EJECT — press to stop tape play, recording, fast-forwarding, or rewinding, or to open the cassette com- partment door.

Note: The radio/cassette player’s auto stop function saves battery life by turning off the motor and releasing the tape-handling parts when the tape reaches its end.

RECORD — press to record from the radio or live, using the built-in MIC.

Note: Sometimes taped AM broadcasts produce a whis- tling sound that you can hear, called a “beat.” Slide BEAT CUT (on the back of the radio/cassette player) to the position that produces the best quality recording.

REWIND — press to rewind a tape to the desired location.

FAST-F— press to fast-forward a tape to the desired location.

USING THE RADIO

1.Set FUNCTION to RADIO to turn on the radio.

2.Set BAND to the desired setting (AM, FM, or FM STEREO).

3.Adjust VOLUME as desired.

4.Rotate TUNING to select a radio station.

5.When finished, set FUNCTION to TAPE to turn off the radio.

LOADING A CASSETTE TAPE

1.Take up any slack in the tape by turning the cassette’s hub with a pencil or your finger. If you do not remove excess slack, the tape might become tangled in the record/playback mechanism. Avoid touching the tape.

2.Press STOP/EJECT to open the cassette compartment door.

SCR-64 specifications

The Radio Shack SCR-64 was a compact and versatile shortwave radio receiver that gained popularity among enthusiasts during the late 1970s and early 1980s. It was well-regarded for its portability, ease of use, and robust performance, making it an ideal choice for both novice and experienced users interested in exploring the shortwave spectrum.

One of the standout features of the SCR-64 was its broad frequency coverage. It was capable of receiving signals across several frequency bands, typically ranging from 1.6 MHz to 30 MHz, enabling users to tune into a diverse array of stations broadcasting from around the world. This wide range of capabilities made the SCR-64 an excellent tool for listening to international news, amateur radio, and various cultural programs.

The SCR-64 incorporated analog tuning, allowing users to manually select frequencies using a dial. While some modern radios have shifted towards digital displays, the analog dial found on the SCR-64 offered a tactile experience that many old-school radio enthusiasts appreciated. The design facilitated precision tuning, allowing users to fine-tune the reception of distant signals with ease.

Additionally, the SCR-64 boasted a built-in telescopic antenna that significantly improved signal reception. This portable feature ensured that users could easily adjust the antenna's length and angle for optimal listening, particularly in areas with high levels of radio interference. An external antenna jack was also available, enabling enthusiasts to connect more powerful antennas for enhanced reception capabilities.

The radio's user-friendly layout included a simple control panel with clear labeling for volume and tone adjustments. It prioritized an intuitive experience, allowing users to focus on the excitement of discovering new broadcasts rather than getting bogged down by complicated settings.

Powering the SCR-64 was another practical consideration. It operated on regular batteries, making it easily usable in remote locations without access to electrical outlets. Its lightweight design further contributed to its portability, making it a popular choice for travelers and outdoor enthusiasts.

In summary, the Radio Shack SCR-64 was a well-balanced shortwave receiver with impressive features for its time. Its broad frequency range, analog tuning, built-in antenna, and portability made it a cherished option for anyone interested in the world of radio communication. Though technology has advanced significantly since its release, the SCR-64 remains a nostalgic symbol of radio listening culture, continuing to spark interest among collectors and vintage radio aficionados today.