4.Remove the installed module if necessary.
a.Pull the tabs on the connector slot outward slightly, until the edge of the memory module pops up.
b.Hold the memory module by the edges and pull it forward out of the compartment.
5.Align the connector on the memory module with the connector of the slot.
6.Push the memory module into the slot at a slight angle until the connectors are fully engaged (Figure 48).
Figure 48. Installing a Memory Module
7.Push down on the edge of the memory module until the module snaps into place.
8.Align the memory module compartment door with the compartment and push the door down until it snaps into place.
9.Reinstall the screw you removed in step 2.
10.Turn on the computer and perform a complete POST to check the memory integrity.
74 Users Manual