+/- button
■RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be captured.
●Setting RGB Values
1. Press the +/ - button, and then use the UP and DOWN 
buttons to select the RGB icon ( 
). The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select the desired RGB value.
-Up/ Down Button : Navigates between R, G, and B icons.
-Left/ Right Button : Changes value of each icon.
3.When you press the +/ - button again, the value you set will be saved and RGB setup mode will end.
※When special effect (colour) from the icon other than 
is selected, it will not be able to select the RGB.
■ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific
●Selecting an ISO Sensitivity
1. Press the +/ - button, and then use the UP and
DOWN buttons to select the ISO icon( |
| ). |
| ||
The ISO menu bar will appear as shown. |
|
|
2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO
: The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
- 80, 100, 200, 400, 800,1000
: You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light and therefore the greater its capacity to take pictures in darker conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarser.
3.When you press the +/ - button again, the value you set will be saved and ISO setup mode will end.