+/- button
■White balance : The white balance control allows you to adjust the colours to appear more natural.
●Selecting a White Balance
●Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
1. Press the +/ - button, and then use the UP and DOWN buttons to select the white balance icon
( ). The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set wil be displayed on the LCD monitor.
AUTO | : The camera automatically selects the appropriate white |
| balance settings, depending on the prevailing lighting |
| conditions. |
DAYLIGHT | : For taking images outside. |
CLOUDY | : For taking images under a cloudy and overcast sky. |
Fluorescent H | : For shooting under daylight fluorescent types of three- |
| way fluorescent lighting. |
1.Select the CUSTOM ( ) menu of the White Balance.
2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.
3.Your custom white balance value is stored.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
Measure:Shutter |
Fluorescent L | : Shooting under white fluorescent lighting. |
TUNGSTEN | : For shooting under tungsten (standard light bulb) lighting. |
CUSTOM | : Allows the user to set the white balance according to the |
| shooting condition. |
Different lighting conditions may cause a colour cast on your images.
3.Press the +/ - button again. The value you set will be saved and White Balance setup mode will end.
[White paper]
《29》