Samsung EC-NV3ZZBBM/AS, EC-NV3ZZSAA, EC-NV3ZZBBC/E2, EC-NV3ZZSBA/E1 manual Metering, Continuous shot

Metering

■If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

- Multi	: Exposure will be calculated based on an
	average of the available light in the image	METERING
			Multi
	area. However, the calculation will be
			Spot
	biased towards the centre of the image
	area. This is suitable for general use.
- Spot	: Only the rectangular area in the centre of
	the LCD monitor will be metered for light.

This is the preferable setting when you want the subject in the centre of the image exposed correctly, regardless of the back lighting.

INFORMATION

●If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, It is better to use exposure compensation.

Continuous shot

■You can select continuous shot, and AEB (Auto Exposure Bracketing).

- Single	: Take one picture only
- Continuous	: Images will be taken continuously		SHOOTING
					Single
	until the shutter button is released.
				Continuous
	The shooting capacity depends on	AEB			AEB
	the memory.
- AEB	: Take three pictures in a series in
		[ PROGRAM mode ]
	different exposures: standard
	exposure(0.0EV), short exposure

(-0.5EV) and over exposure (+0.5EV). Use the mode if it is hard to decide exposure of the object.

※High resolution and picture quality increases file saving time, which increases stand-by time.

※If the [Continuous] or [AEB] sub menu is selected, the flash will be off automatically.

※If less than 3 pictures are available in the memory, the AEB shooting is not available.

※It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.

《37》