Samsung EC-WP10ZZBPUIT manual Exposure compensation, Indicator, ISO 80, 100, 200, 400, 800, 1600

Shooting ( )

Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu.

Compensating Exposure
1.	Click the Up/Down button from the
	Shooting menu to select [EV] (		).
2.	Use the Left and Right buttons to set			EV
	the desired exposure compensation
	factor.
3.	Press the OK button. The value you			Back	Move
	set will be saved and the Exposure Compensation setup mode
	will be closed. If you change the exposure value, the exposure
	indicator (	) will be displayed on the Left of the LCD monitor.

ÄA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

ISO

You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers.

[Auto] : The camera's sensitivity is
automatically changed by
variables such as lighting value
or subject brightness.	ISO

[ISO 80, 100, 200, 400, 800, 1600, 3200] :

You can increase the shutter speed while BackMove the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance. The higher the ISO value, the higher the camera’s sensitivity to light and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.

ÄWhen [Motion Capture] is set, ISO speed will be set to Auto.

Ä[ISO] is enabled only in [Program] mode.

41