Samsung EC-PL50ZPBP/E3 manual Selecting the self-timer, Motion Timer, Pressing the Shutter button

Self-timer ( ) / Right button

Selecting the self-timer

1. Select a Recording mode with the exception of Voice recording mode.(p.20)

2. Press the SELF-TIMER / RIGHT ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second,

2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

		[Selecting the 10 SEC
		self-timer]
Self-timer mode indicator
Icon	Mode	Description
	10SEC	Pressing the shutter button will allow an interval of
	self-timer	10 seconds before the image is taken.

Motion Timer

Motion	Icon & Self-timer lamp
Pressing the Shuter button after	Blink (1 second interval)
setting the Motion Timer
Detecting the subject's movement	Blink (0.25 second interval)
No movement is detected	Turn on and the image is taken
	after 2 seconds

The Motion Timer flows are as followings. (Movie Clip mode excluded)

Selecting the Motion Timer		Pressing the Shutter button
Confirming the composition (Within 6 sec.)*1			Starting the detec-
tion (Swing your hands fully)*2		Stopping the detection
(Do not move)	Taking an image (after 2 sec.)

*1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so confirm the composition within 6 seconds.

*2: Move your body or hands fully.

In the following cases, the Motion Timer may not operate.

2SEC	Pressing the shutter button will allow an interval of
self-timer	2 seconds before the image is taken.
	A picture will be taken after about 10 seconds and
Double	2 seconds later a second picture will be taken.
	When using the flash, the 2-second
self-timer
	self-timer may be delayed for longer than 2 sec-
	onds depending on the flash charging time.
Motion	The camera detects the subject's movement 6
	seconds after pressing the Shutter button, and the
Timer
	picture is taken when the movement is stopped.

The focus distance is over 3m. The exposure is too bright or dark In backlight conditions.

The movement is insignificant The movement is detected beyond the center part (50%) of the sensor where the movement is recognized. If the camera doesn`t sense any movement for 30 seconds, or the camera doesn’t sense stillness after sensing movement

The detection range of

Motion Timer

035