Samsung LS17TBTQSZ/EDC, LS17TBTQS/EDC, LS17TBTQS/SAI manual Connecting Cables, Rgb Out

Connecting Cables

Connect the power cord to the DC power supply and to the 220V or 110V wall outlet. (The voltage is automatically selected by the power supply.)

To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.)

-Connect the RGB OUT port of the monitor and the D-Sub port of another device using the D-Sub cable.

[RGB OUT]

When the graphics card supports D-Sub (analog) output

-Connect the RGB IN + USB port of the monitor and the D-Sub port and USB port of the computer using the Tableau Signal Cable.

If the USB port of the computer is not connected, even though the picture is displayed on the screen, the position of the electronic pen is not recognized.

[RGB IN + USB]