Pen Tip | This part makes contact with the screen and plays the role of the left mouse button. |
Switch | Press the pen once lightly on the screen for a click and press the pen twice for a |
|
Signal
Transmitter
Pen Switch
Charge
LED
Pen Power
Switch
Charge Port
This part transmits the signal and notifies its position.
Plays the role of the right mouse button.
Red means the charge is not complete.
Green means the charge is completed.
The switch used to turn the pen on or off.
This part is connected to the Electronic Pen Charger. The electronic pen is charged if it is connected to the charger when the monitor power is connected.
Electronic Pen Charger
When connecting the charger connection port to the monitor's DC OUT port, the charger LED turns orange, red and then green in this order, and is turned off indicating that the charge is ready.
While the electronic pen is inserted into the charger, the charger LED is red when the pen is being charged, and turns green when the pen is fully charged.
Precautions when Using the Electronic Pen
Use the electronic pen keeping it as perpendicular (90°) to the screen as possible.
To use the electronic pen at another angle to the screen surface run the Mouse Pointer Position Adjustment.
When using the electronic pen, do not cover the Signal Transmitter part with your hand.
Since the Signal Transmitter has to transmit ultrasonic waves and the Signal Button has to receive the signal to operate properly, if your hand covers the transmitter, the precise position may not be recognized.
Please avoid using noisy home appliances such as a dryer or shaver when using the electronic pen.
Since the Signal Transmitter transmits ultrasonic waves to send the current position, external noise may cause errors in recognizing the position.
Maintenance and Replacement of the Electronic Pen
Maintenance of Clean with a soft cloth damped with the "recommended cleaning solution".