Samsung LS17TBTQS/EDC, LS17TBTQSZ/EDC, LS17TBTQS/SAI manual Refer to thePreset Timing Modes

Has the video card Set the video card by referring to the video card

been set properly? manual.

There is a message Have you installed Install the monitor driver according to the Driver

that readsthe monitor driver? Installation Instructions. "Unrecognized

monitor, Plug & Play See the video card Install the monitor driver according to the Driver

(VESA DDC) manual to see if the Installation Instructions.

monitor found". Plug & Play (VESA DDC) function can be supported.

Settings.

Windows ME/2000 :

Set the resolution at the Control Panel → Display →

and Themes → Display → Settings.

There are only 16 Have the Windows Windows XP :

colors shown on the colors been set Set the resolution at the Control Panel → Appearance screen. The screen properly?

colors have changed after changing the video card.

Screen Display.	On Screen Display	[MENU / ] button for at least 5
	(OSD) Menu to	seconds.
	prevent changes?
The screen shows	Is the screen	Check the signal cable connection.
strange colors or	displaying only one
just black and white.	color as if looking at	Make sure the video card is fully inserted in it's slot.
	the screen through a
	cellophane paper?
	Have the screen	Reboot the computer.
	colors become
	strange after running
	a program or due to
	a crash between
	applications?
	Has the video card	Set the video card by referring to the video card
	been set properly?	manual.
The screen	Have you changed	Adjust screen image position and size using the OSD.
suddenly has	the video card or the
become	driver?
unbalanced.
	Have you adjusted	Adjust the resolution and frequency at the video card.
	the resolution or	(Refer to thePreset Timing Modes).
	frequency to the
	monitor?
	The screen can be unbalanced due to the cycle of the video card signals.
	Readjust Position by referring to the OSD.
The screen is out of	Have you adjusted	Adjust the resolution and frequency of the video card.
focus or OSD	the resolution or	(Refer to the Preset Timing Modes).
cannot be adjusted.	frequency on the
	monitor?
LED is blinking but	Is the frequency	Adjust the frequency properly by
no images on the	properly adjusted	referring to the video card manual
screen.	when checking the	and the Preset Timing Modes.
	Display Timing on
	the menu?	(The maximum frequency per
		resolution may differ from product
		to product.)

Check when	MagicTune™ feature	* To check whether your PC is available for
MagicTune™ does	is found only on PC	MagicTune™ feature, follow the steps below (When
not function	(VGA) with Window	Windows™ is XP);
properly.	OS that supports
	Plug and Play.	Control Panel → Performance and Maintenance →
		System → Hardware → Device Manager → Monitors
		→ After deleting Plug and Play monitor, find 'Plug and
		Play monitor' by searching new Hardware.