1Preparations
Icons | Description |
|
|
Configure Customized Key and press [ ]. The following options will be enabled.
zECO - MAGIC - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Adjust the screen brightness.
Volume can be adjusted if a cable is connected to the [DP IN] or [AUDIO IN] port.
Confirm a menu selection.
Pressing the [] button when the OSD menu is not displayed will change the input source (Digital1/Digital2/DisplayPort). If you power on
the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Separate the screen in half and display output from two different source devices simultaneously on the left and right sides of the screen.
Power Indicator
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
z Refer to "9.2 PowerSaver"for details about the
zTo reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
1 Preparations 22