6Setup and Reset
6The selected option will be applied.
Configuring Backlight
1Press [ 
] on the product.
2Press [ 
] to move to SETUP&RESET and press [
] on the product.
3Press [ 
] to move to ECO and press [
] on the product.
4Press [ 
] to move to Backlight and press [
] on the product. The following screen will appear.
ECO |
|
|
|
|
Eco Motion Sensor | : 5 Min |
|
| |
Backlight |
|
|
|
|
Off |
|
| ||
Eco Light Sensor |
| Dimming |
|
|
Sensitivity |
|
|
| |
Brightness Level |
|
|
|
|
Eco Saving |
| Off |
|
|
Eco Icon Display |
| Off |
|
|
|
|
|
| |
Return | Move | Enter | ||
zOff: Turn off the screen and activate DPMS mode. If Off is selected, it takes several seconds for the monitor to detect movement and turn on after it turned off.
zDimming: Reduce the brightness of the screen (still turned on).
5Press [ 
] to move to the option you want and press the [
].
6The selected option will be applied.
z
z
z
z
The performance of Eco Motion Sensor is maximized to a specific user distance (1m) and angle (40 degrees).
The sensor may not detect you if you are motionless.
If you think that the mode entry message appears too frequently, increase the time setting of the Eco Motion Sensor or turn the Eco Icon Display Off.
Avoid using radio equipment such as a
6 Setup and Reset 55