Samsung LT24B301MW/ZR manual Aerial Air / Cable, Country, Auto Tuning, Manual Tuning, Fine Tune

Basic Features

Channel Menu

¦¦ Retuning Channels

MENUm→ Channel → ENTERE

Aerial (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the LED display.

Country

(depending on the country)

The PIN input screen appears. Enter your 4 digit PIN number.

✎✎Select your country so that the LED display can correctly auto-tune the broadcasting channels.

■■ Digital Channel: Change the country for digital channels.

■■ Analogue Channel: Change the country for analogue channels.

Auto Tuning

(depending on the country)

✎✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears.

■■ Auto Tuning

––Air / Cable: Select the antenna source to memorise.

Digital & Analogue / Digital / Analogue: Select the channel source to memorise.

✎✎ When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.

xx Search Mode(Full / Network / Quick): Selects the Search Mode settings among Full / Network / Quick.

xx Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.

xx Network ID: When Network is Manual, you

can set up Network ID using the numeric buttons.

xx Frequency: Displays the frequency for the channel. (differs in each country)

xx Modulation: Displays available modulation values.

xx Symbol Rate: Displays available symbol rates.

■■ Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

––Start Frequency / Stop Frequency: Set the start or stop frequency (differs in each country).

––Symbol Rate: Displays available symbol rates.

––Modulation: Displays available modulation values.

Manual Tuning

Scans for a channel manually and stores in the LED display.

✎✎If a channel is locked using the Channel Lock function, the PIN input window appears.

■■ Digital Channel Tuning: Scans for a digital channel.

1.Press the ENTEREbutton to select New.

✎✎ When selecting Aerial → Air: Channel, Frequency, Bandwidth

✎✎ When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate

2.Press the dbutton to select Search. When scanning has finnished, a channel is updated in the channel list.

■■ Analogue Channel Tuning: Scans for a analogue channel.

1.Press the ENTEREbutton to select New.

2.Set the Programme, Colour System, Sound System, Channel and Search.

3.Press the dbutton to select Store. When scanning has finnished, a channel is updated in the channel list.

Transfer Channel List

The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.

■■ Import from USB: Import channel list from USB.

■■ Export to USB: Export channel list to USB. This function is available when USB is connected.

✎✎USB format should be FAT32.

Fine Tune

(analogue channels only)

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.

✎✎Settings are applied to the channel you’re currently watching.

✎✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner

✎✎To reset the fine-tuning, select Reset.

English 22