Samsung LT24B301EWY/XE, LT24B301EWY/EN Setting the Time, System Menu, MENUm→ System → Entere

Basic Features

System Menu

¦Setting the Time

MENUm→ System → ENTERE

Time

■Clock: Setting the clock is for using various timer features of the LED display.

✎The current time will appear every time you press the INFO button.

✎If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

xAuto: Set the current time automatically using the time from a digital channel.

✎The antenna must be connected in order to set the time automatically.

xManual: Set the current time manually.

✎Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Day, Month, Year, Hour and Minute manually.

✎Available only when Clock Mode is set to Manual.

✎You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control.

Time Zone (Auto / Manual) (depending on the country): Select your time zone.

✎This function is only available when the Clock Mode is set to Auto.

–GMT(GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00): Selects your time zone.

✎This function is only available when the Time Zone is set to Manual.

–DST(Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or of off.

✎This function is only available when the Time Zone is set to Manual.

Using the Sleep Timer

■Sleep Timer t: Automatically shuts off the LED display after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

✎ To cancel Sleep Timer, select Off.

Setting the On / Off Timer

■On Timer

On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock fi rst.

On Timer 1

Setup							Off
Sun	Mon	Tue	Wed	Thu	Fri	Sat
Time						0:00
Volume						20
Source								TV
Aerial							DTV
Channel						1

Close

R Return

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer.

✎The c mark indicates the day you've selected. Time: Set the hour and minute.

Volume: Set the desired volume level.

Source: Select a desired input source when the LED display is turned on automatically. (USB can be selected only when a USB device is connected to the LED display) Aerial (when the Source is set to TV): Select ATV or DTV.

Channel (when the Source is set to TV): Select the desired channel.

Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo fi les to be played when the LED display is turned on automatically.

✎NOTE

xIf there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.

xWhen there is only one photo file in the USB, the Slide Show will not play.

xIf a folder name is too long, the folder cannot be selected.

xEach USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

xIt is recommended that you use a USB memory stick and a multi card reader when using On Timer.

xThe On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.

English 27