6Setup and Reset
6.5Key Repeat Time
Control the response rate of a button when the button is pressed.
6.5.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [ ] by moving the JOG button UP. Next, press the JOG button.
2Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
Settings |
| Configure the | |
Eco Saving | Off | ||
response rate of a | |||
PC/AV Mode |
| button when the button | |
| is pressed. | ||
DisplayPort Ver. | Acceleration |
| |
Source Detection |
| ||
1 sec |
| ||
|
| ||
Key Repeat Time | Acceleration |
| |
| 2 sec |
| |
Off Timer | Auto |
| |
Power LED On | No Repeat |
| |
|
|
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
6 Setup and Reset 70