Samsung HMX-H300RP/EDC, HMX-H304SP/MEA, HMX-H300BP/EDC, HMX-H304BP/EDC, HMX-H304BP/MEA PC Software

					System setting
Submenu items	PC Software
	If you set PC Software to On, you can use the PC software built into
• Off: Closing the LCD screen turns off the camcorder.
	the camcorder (Intelli-studio) by connecting your camcorder to your
•  Min: Closing the LCD screen starts the Quick On STBY	PC using the camcorder’s USB cable. You can download the video
mode after a short period of time. The camcorder	and photo images stored on the camcorder to your PC’s hard disk
stays in Quick On STBY mode for 5 minutes and	and edit the videos and photos using the internal PC software.
then turns off unless you open the LCD screen or	1.	Touch the Menu (		)  Setting
push a button.					PC Software
		(	) tab  “PC Software.”
					Off
• We recommend turning off the camcorder after use to reduce energy	2.	Touch the desired submenu item.			On
consumption.	3.			1/1
However, as an alternative, you can use the Quick On STBY function		To exit the menu, touch the Exit
under most shooting conditions to reduce energy consumption		(	) or Return (	) tab.
effectively.
• The mode indicator keeps blinking in the Quick On STBY mode.
• The Quick On STBY mode is not available under the following
conditions:		Submenu items
- When the LCD screen is open.
- When a video cable (HDMI, Audio/Video cable) or the USB cable		• Off: Disables the PC Software function.
is connected to the camcorder.		• On: The internal editing software starts when you connect

- When you operate the buttons on the camcorder.	the camcorder to a PC.
	• The PC Software function is not available under the following
	conditions:
	- If “USB Connect” is set to “PictBridge”
	• To enable the PC Software function, set “USB Connect” to “Mass
	Storage,” in the system setting menu option. page 84
	• The PC Software is compatible with the Windows operating systems
	only.