Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you do not insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
• When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the channel • The image may differ depending on the model. list is updated.
✎✎NOTE
•You must obtain a “CI or CI+ CARD” from a local cable service provider.
•When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
•Insert the “CI or CI+ CARD” in the direction marked on the card.
•The location of the COMMON INTERFACE slot may be different depending on the model.
•“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
•If you have any problems, please contact a service provider.
•Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.
Initial Setup
When the TV is initially powered on, a sequence of
✎✎If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to
If You Want to Reset This Feature...
You should do Setup (MENU → System) again at home although you did in shop.
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is
✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
Changing the Input Source
Source
TV / Ext. / HDMI1 / HDMI2/DVI / AV / Component
Use to select TV or other external input sources such as DVD /
✎✎Ext. always stays activated. ✎✎Press the TOOLS button.
•Edit Name
You can set an external input source name you want.
––When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
––When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.
––When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name.
•Information
You can see detailed information about the connected external device.
English
English - 7