Setting Up the Network Connection
To set up the wireless connection using Auto Network Search, follow these steps:
1. In the Network Settings menu, press the ▲▼ |
buttons to select Network Setting, and then |
✎NOTE
▪You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.
05 Setup
| press the ENTER button. |
2. | The Internet Protocol Setup screen appears. |
Press the ▲▼ buttons to select the Internet | |
| Protocol Setup, and then press the ENTER |
3. | button. |
Press the ▲▼ buttons to select Auto or | |
| Manual, and then press the ENTER button. |
Settings
Settings
Display
Audio
System
Network
Language
Security
General
Support
|
|
| Security Key |
|
| |
|
| Network Settings | (0) | |||
Security Key | a | b c |
| |||
1 | .,@ | lid Only) | abc | 3 | def | |
| 2 | |||||
4 | ghi |
| 5 | jkl | 6 | mno |
7 | pqrs |
| 8 | tuv | 9 | wxyz |
| a/A/a/ | 0 | ] |
| Delete | |
a Clear All | b Space | c Done | ||||
(/) Cursor " Select ' Return
Display |
| Network Setting |
|
| |||
Access Point Selection | : Not Selected |
|
| ||||
Audio |
| \ | |||||
SystemInternet Protocol Setup | : Auto | 0 | 0 | 0 | |||
Network | IP Address | : | 0 | ||||
Language Subnet Mask | : | 0 | 0 | 0 | 0 | ||
Security | Gateway | : | 0 | 0 | 0 | 0 | |
GeneralDNS | : Auto | 0 | 0 | 0 | |||
Support | DNS Server | : | 0 | ||||
|
| a PBC (WPS) > Move | " Select | ' Return | |||
4.If you selected Auto, press the ▲ button to go to Access Point Selection, and then press the ENTER button.
The Network function searches for available wireless networks.
When done, it displays a list of the available networks.
5.In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button.
6.If the PIN/Security
7.Press the ▲▼ buttons to select PIN or Security.
For most home networks, you would select Security (for Security Key).
8.On the Security screen, enter your network’s Pass Phrase.
9.To enter the Pass Phrase, follow these general directions:
•Press the number keys on your remote to enter numbers.
•Use the arrow keys on your remote to move from button to button on the Security Key screen.
•To enter letters, move to the button labelled a/A/1/, and then press the ENTER button. Each time you press the ENTER button, you change the kind of characters you can enter (a/A/1/).
•To enter a letter, press the number button that corresponds to the letter. Pressing the button repeatedly changes the letter.
•To delete the last letter or number you entered, move to the Delete button, and then press the ENTER button.
•To clear all entered letters and numbers, move to the Clear key, and then press the ENTER button. You can also just press the RED(A) button on your remote.
10.When done, press the YELLOW(C) button on your remote, or move to the Done button, and then press the ENTER button.
The Network Connecting screen appears.
11.Wait until the connection confirmation message is displayed, and then press the ENTER button. The Network Settings screen reappears.
English 39