Samsung BD-C5900/XEF, BD-C5900/EDC, BD-C5900/XEE manual Appendix, Troubleshooting

Appendix

	Troubleshooting
Before requesting service, please check the following.
PROBLEM		SOLUTION
No operation can be performed with the	• Check the batteries in the remote control. They may need replacing.
remote control.	• Operate the remote control at a distance of no more than 6.1m.
	• Remove batteries and hold down one or more buttons for several minutes
	to drain the microprocessor inside the remote control to reset it. Reinstall
	batteries and try to operate the remote control again.
Disc does not play.	• Ensure that the disc is installed with the label side facing up.
	• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.	• Ensure that the disc has disc menus.
The prohibition message appears on the	• This message appears when an invalid button is pressed.
screen.	• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles)
	• You’ve requested a title or chapter number or search time that is out of
	range.
Play mode differs from the Setup Menu	• Some of the functions selected in the Setup Menu may not work properly if
selection.	the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.	• The Screen Ratio is fixed on your Blu-ray Disc/DVDs.
	• This is not a problem with the product.
No audio.	• Make sure you have selected the correct Digital Output in the Audio Options
	Menu.
The screen is blocked	• If the HDMI output is set to a resolution your TV cannot support (for
	example, 1080p), you may not see a picture on your TV.
	• Press the STOP (	) button (on front panel) for more than 5 seconds with
	no disc inside. All settings will revert to the factory settings.
	• When the factory default settings are restored, all the user data stored in
	the BD data will be deleted.

08 Appendix

English 59