Settings
❑Wireless (General) - Automatic
After followng Steps 1 to 3 in "Configuring Your Network Connection" on page 32.
1 . Select Start in the Network Settings screen, and then press the E button.
The product searches for and then displays a list of the available networks.
Network Settings
Select your wireless router from the list. | 1/10 | |
iptime23 | Refresh | |
ELT | ||
WPS(PBC) | ||
JSY | ||
Previous | ||
KT_WLAN_C361 | ||
Next | ||
Mirhenge_edu | ||
Cancel | ||
SO070VOIP | ||
|
2 . Select the desired network, and then press the E button.
3 . Select Next, and then press the E button again.
4 . On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing E button.
5 . When done, select Next at the right of the screen. The product verifies the network connection and then connects to the network.
NOTE
You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.
❑Wireless (General) - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After folloiwng Steps 1 to 3 in "Configuring Your Network Connection" on page 32.
34 English
1 . Select Start in the Network Settings screen, and then press the E button. The product searches for and then displays a list of the available networks.
2 . Select the desired network or the Add Network, and then press the E button.
3 . Select Next, and then press the E button again.
4 . If you select the Add Network, enter your wireless router's name to connect.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
Select Next, and then press the E button again. You can select security type, and then select Next, and then press the E button again.
5 . On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
6 . When done, select Next at the right of the screen, and then press the E button.
7 . The Network Status screen appears.
The product attempts to verify the network connection and fails.
8 . Select IP Settings on the right of the screen, and press the E button. The IP Settings screen appears.
9 . Select the IP Mode field, and then set it to Manual.
10 . Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.
NOTE
You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 33.
11 . When done, highlight OK, and then press E button. The Network Status screen appears. The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E button.