28 Troubleshooting Chart
Symptom | What's Probably Wrong | What To Do |
No sound during playback of | Didn't record. | Check MIDI connections. |
recorded parts | MIDI channels not properly | Check MIDI channel |
| corresponding with sound | assignments. |
| sources. |
|
| Tracks are muted | Check track mute selection. |
Won't record after touch or | MIDI filters for after touch and | In MIDI filters mode, set after |
system exclusive data | system exclusive are enabled | touch and sysex record to on |
Won't save or load to tape | Bad connections | Check wiring |
| Bad tape | Use a certified data tape. |
| Level of sync tone is too high or | Try a higher or lower level to |
| low | tape. |
| Errors in data | |
Won't sync to tape. | Bad connections. | Check cables. |
| Level on tape. | Set level at or near 0VU. |
|
| Turn off noise reduction, if |
|
| possible. |
If problems aren't solved after troubleshooting and referring to the manual, consult your Alesis dealer for assistance.
- Page 40 -