Setup, Before Starting Initial Settings

Setup

Before Starting (Initial Settings)

1.Turn on your TV after connecting the product. (When the product is connected to TV for the first time, product will turn on automatically and the Initial Settings screen will be displayed.)

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

> Move " Select

2.Press the ▲▼ buttons to select desired language, then press the ENTER button.

3.Press the ENTER button to select Start button.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

Start

a Previous " Select

4.Press the ▲▼ buttons to select the desired TV Aspect ratio, then press the ENTER button. (See page 31)

Initial Settings I Network

Network Setting is needed to use various Internet services.

Choose the primary method for connecting to network.

Wired : Set the network by using Ethernet cable.

Please make sure that Ethernet cable is connected.

Wired	Wireless	PBC (WPS)
	a Previous	d Skip < Move " Select

5.Press the ◄► buttons to the select the desired Network Settings: Wired, Wireless or PBC (WPS), then press the ENTER button. (See pages 38~41)

The Network Test will start and Initial Settings will be completed.

6.Press the OK button.

The home menu will be displayed. (For more information about home menu, please see page 30)

•Home Menu

		You Tube
	Please activate Internetinternet@radioTV service
	to enjoy a variety of Internet Services.
No Disc	a Change Device	d View Devices	" Enter

✎NOTE

▪When the product is connected to TV for the first time, product will turn on automatically.

Do not confuse because this is not malfunction.

▪The home menu will not be displayed if you do not configure the initial settings.

▪If you press the BLUE(D) button during the network setup, you can access the home menu even if the network setup is not completed yet.

▪When you return to home menu, the full screen mode will be cancelled automatically.

▪If you want to display Initial Setting screen again in order to make changes, press the STOP ( ) button on the front panel of the product for more than 5 seconds with no disc inserted.

▪Use the HDMI cable to connect the product to an Anynet+(HDMI-CEC)-compliant Samsung TV.

If the TV uses a language supported by the product, that language will be set to a preferred language automatically.

However, the Anynet+(HDMI-CEC) feature should be set to On in both TV and the product.

05 Setup

English 29