Samsung UA40B6000VRXXP manual Setting up the TV with your PC, Configuring the Sound Menu

¦Setting up the TV with your PC

NPreset: Press the SOURCE button to select PC mode.

❑Auto Adjustment

Use the Auto Adjust function to have the TV automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

TPress the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.

N This function does not work in DVI-HDMI mode.

❑Screen

■Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen.

■PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

■Image Reset

You can replace all image settings with the factory default values.

	Brightness		: 45
Picture	Sharpness		: 75
	Auto Adjustment				▶
	Screen
	Advanced Settings
	Picture Options
	Picture Reset
		Screen
Coarse					50
Fine					0
PC Position
Image Reset
		UMove		EEnter RReturn

SOUND

¦Configuring the Sound Menu

❑Mode → Standard / Music / Movie / Clear Voice / Custom

TPress the TOOLS button to display the Tools menu. You can also set the sound mode by selecting Tools → Sound Mode.

●Standard: Selects the normal sound mode.

●Music: Emphasizes music over voices.

●Movie: Provides the best sound for movies.

●Clear Voice: Emphasizes voice over other sounds.

●Custom: Recalls your customized sound settings.

Sound

Mode	: Custom	▶
Equalizer
SRS TruSurround HD	: Off
Auto Volume	: Off
Speaker Select	: TV Speaker
Sound Select	: Main
Sound Reset

❑Equalizer

The sound settings can be adjusted to suit your personal preferences.

●Mode: Selects the sound mode among the predefined settings.

●Balance L/R: Adjusts the balance between the right and left speaker.

●100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.

●Reset: Resets the equalizer settings to the default values.

❑SRS TruSurround HD → Off / On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

O You can select these options by simply pressing the SRS button on the remote control.

English - 17