■Contents (when Source is set to USB)
You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically. N If the folder name is too long, the folder can not be selected.
■Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
N When Manual is selected, press the ► button to select the desired day of the week. Press the ENTEREbutton over the desired day and the cmark will appear.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
N Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.
INPUT / SUPPORT
¦Input Menu
❑Source List
Use to select TV or other external input sources such as DVD /
O Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button, number buttons.
O You can also watch HDMI mode simply by pressing the HDMI button on the remote control.
■TV / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
N You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
N If USB devices are connected to the USB1(HDD) jacks, they are displayed as USB in order.
N Using the Colour buttons on the remote with the Source list
Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not appear in the list.
TOOLS (Tools): Displays the Edit Name and Information menus.
NPC always stays activated.
Input
Source List
Edit Name
Source List
TV
PC: - - - -
AV: - - - -
Component : - - - -
HDMI1/DVI : - - - -
HDMI2: - - - -
Refresh TTools
❑Edit Name
■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV /
Name the device connected to the input jacks to make your input source selection easier.
NWhen a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI PC in the Edit Name of the Input mode.
NWhen connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required.