Samsung UA40B6000VRXXP manual Securing the TV to the Wall, To avoid the TV from falling

Page 44

¦Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:

.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

N You may need additional material such as an anchor depending on the type of wall.

N Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

.Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

N Screw Specifications

•For a 32 ~ 40 Inch LED TV: M6 X 15 / For a 40 ~ 55 inch LED TV : M8 X L30

.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.

N Install the TV near to the wall so that it does not fall backwards.

N It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

N Untie the string before moving the TV.

.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Wall

Wall

English - 

Image 44 Contents
Serial No Contact Samsung WorldwidePrecautions When Displaying a Still Image LicenseContents Setting UP Your TV Viewing the Control PanelAccessories Holder-Ring 4eaViewing the Connection Panel Connects to an antenna or cable TV systemHdmi in 1 DVI, 2, 3 Connector for software upgrades and Media Play, etcConnector for service only Viewing the Remote Control Numeric Buttons Press to change the channelCH List Displays the Channel List on screen Teletext FunctionsInstalling Batteries in the Remote Control OperationViewing the menus Operation the OSD On Screen DisplayPlacing Your Television in Standby Mode Plug & Play FeatureIf you want to reset this feature Message Select the OSD Language. is displayedChannel Channel MenuManaging Channels EnglishChannel List Option Menu in Programmed Mode Configuring the Picture MenuPicture Advanced Settings 1080p signals are input Film Mode → Off / Auto1 / Auto2Picture Options Digital NR → Off / Low / Medium / High / AutoViewing Picture-in-Picture Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XPDisplay Modes Sub and HDMI/DVI InputSound Setting up the TV with your PCConfiguring the Sound Menu Selecting the Sound Mode Auto Volume → Off / OnSound Reset → Reset All / Reset Sound Mode / Cancel Speaker SelectSetup Configuring the Setup MenuSetting the Time Input / Support Input MenuSource List Edit NameSoftware Upgrade By USB Alternative Software BackupHD Connection Guide Contact SamsungMedia Play USB Connecting a USB DeviceUsing the Remote Control Button in Media Play Menu Media Play Function Entering the Media Play USB MenuRemoving a USB Memory Device Safely Screen DisplaySorting the Photo List Basic ViewTimeline FolderPhoto List Option Menu Viewing a Photo or Slide Show Viewing a Slide ShowPlaying current group To perform a Slide Show with only the selected filesSlide Show Option Menu Picture Setting / Sound Setting Sorting the Music ListTitle ArtistYou can change the mood information of music files Change Group When the Sort key is MoodMusic List Option Menu Playing a Music Playing a music filePlaying the music group Playing the selected music filesUsing the Setup Menu Music Play Option MenuConnecting Anynet+ Devices What is Anynet+?ANYNET+ To connect to a TVSetting Up Anynet+ Switching between Anynet+ DevicesSetup Anynet+ MenuTV Remote Control Buttons Available in Anynet+ Mode RecordingListening through a Receiver Home theatre Device Type Operating Status Available ButtonsTroubleshooting for Anynet+ Problem Possible SolutionHDMI-CEC is set to On in the Anynet+ Setup menu Plug & Play, etcTeletext Feature RecommendationsInstalling the Stand Teletext pages are organized according to six categoriesPart Selected page numberDisconnecting the Stand Installing the Wall Mount KitWall-Mount Type English 0 Assembling the CablesStand Type Preparing before installing Wall-Mount Anti-Theft Kensington LockSecuring the TV to the Wall To avoid the TV from fallingTroubleshooting Before Contacting Service Personnel Before contacting service personnelProblem No sound or picture Normal picture but no soundSpecifications Version 3, 29 June PreambleConveying Verbatim Copies Conveying Non-Source Forms Page Page How to Apply These Terms to Your New Programs Revised Versions of this LicenseLimitation of Liability Interpretation of Sections 15GNU Lesser General Public License Lgpl Conveying Verbatim Copies Conveying Non-Source Forms Page Page END of Terms and Conditions OpenSSL License Original SSLeay License
Related manuals
Manual 2 pages 50.32 Kb Manual 2 pages 40.1 Kb Manual 59 pages 50.5 Kb