Samsung BD-C7500/EDC, BD-C7500/XEN manual Case 1 Installing on the stand, Putting on the Cover-Jack

Putting on the Cover-Jack

To access the connection terminals, slide the cover jack off the product. Replace it when you are finished making connections.

04 Connections

Installing the Blu-ray Disc Player

You can install your product on a stand or hang it on the wall.

When installing the product, please make sure that enough space is left to open the door. If you do not, product will not operate normally.

Installation Precautions

•If you install your palyer on a wall, the wall must be flat and vertical.

•Avoid installing the product in areas with high temperature or humidity, or on a wall that cannot sustain the weight of the set.

•Check the strength of the wall. If the strength of the wall is insufficient to support the product, make sure to reinforce the wall before installing.

•Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase and use the appropriate mollies and fixing screws.

•Cables connecting to external devices are to be connected to the product before you install it.

•To prevent electric shock, be sure to turn off the product before you install it.

•Do not hang on the installed product and avoid hitting it.

•Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in damage to the product.

•If you install the product on a wall, please make sure that a child does not pull any of connecting cables, as it may cause the product to fall.

Case 1 : Installing on the stand

To install on the Stand, insert the Stand Holder into the bottom slot of the Blu-ray Disc player and turn the screw clockwise to fix it.

English 27