Samsung WW12K8402OW/WS manual Operations, Control panel

Operations

Control panel

02			08	09
				10
01
03	04	05	06
				07

Operations

01 Cycle Selector	Turn the dial to select a cycle.
02 Display	The display shows current cycle information and estimated time
	remaining, or an information code when a problem occurs.
	Press to change the water temperature for the current cycle.
03 Temp.	Press and hold for 3 seconds to turn on/off the Drum Light.
	The drum light turns off automatically after 2 minutes.
04 Rinse	Press to change the rinse count for the current cycle. You can set
	the rinse count to a max of 5, depending on the cycle.
	Press to change the spinning speed for the current cycle.
	•	Rinse Hold: The final rinse process is suspended so that the
		laundry remains in the water. To unload the laundry, run a
		drain or spin process.
05 Spin	•	No Spin: The drum does not rotate after the final drain process.
	• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
		When the cycle time and spinning speed appear, press Spin
		repeatedly until a desired spinning speed is selected. Then,
		press Start/Pause to start the cycle. The spinning time depends
		on the selected cycle.
06 Options	Press to enter the Options screen.
	Press to turns on Smart Control. If Smart Control turns on, the
07 Smart Control	washing machine can be controlled on a mobile device.
	Press and hold for 3 seconds to enter the Settings screen.
08 Navigation	Use to navigate through the menus or to adjust the value of the
buttons	settings.
09 Power	Press to turn on/off the washing machine.
10 Start/Pause	Press to start or stop operation.

32  English

Untitled-12 32

11/15/2017 2:38:04 PM