Setup
WPS(PBC)
The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.
If your wireless router has a WPS(PBC) button, follow these steps:
1.Press the ▲▼ buttons to select WPS(PBC).
Settings
Network Settings
Display
Select a network connection type.
2.Press the ENTER button.
3.Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect.
4.Wait until the connection is automatically established.
Network Status
Check whether a connection to the network and the Internet have been established.
Audio
Network
System
Wired
Wireless
Language(General)
Connect to the Access Point easily by pressing the
Security WPS(PBC) WPS(PBC) button. Choose this if your Access Point
Generalsupports Push Button Configuration(PBC).
One Foot
Support Connection
> Move " Enter ' Return
2.Press the ENTER button.
3.Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote.
One Foot Connection
You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:
1.Press the ▲▼ buttons to select One Foot Connection.
Settings
Network Settings
Display
Select a network connection type.
Audio
Settings |
| Network Status |
|
Display |
| MAC Address | XX:XX:XX:XX:XX:XX |
Audio |
| IP Address | 0.0.0.0 |
Network | KT_WLAN | Subnet Mask | 0.0.0.0 |
Gateway | 0.0.0.0 | ||
System |
| DNS Server | 0.0.0.0 |
Internet is connected successfully.
Language
If you have a problem using any Internet services, contact your Internet service
Securityprovider.
General
SupportNetwork Settings | IP Settings | Retry | OK |
< Move " Enter ' Return
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection when you use the
•Allow (All) : The Internet connection is allowed for all
•Allow (Valid Only) : The Internet connection is allowed only for
•Prohibit : No Internet connection is allowed for any
✎NOTE
What is a valid certificate? |
When the product uses |
disc data and a request to the server to certify |
the disc, the server uses the transmitted data |
to check if the disc is valid and sends the |
certificate back to the product. |
Network
Wired
System
Wireless
Language(General)
Security WPS(PBC)
General One Foot
Support Connection
42 English
Connect to your wireless network automatically if your Wireless Router supports One Foot Connection. Select this connection type after placing the Wireless Router within 10 inches(25cm) of Samsung Wireless LAN Adapter.
>Move " Enter ' Return
The Internet connection may be restricted |
while you are using |