Samsung HT-D6730W/ZA manual Product is not working, Standby mode, Do not use this unless necessary

Symptom	Check/Remedy
Aspect ratio cannot be changed.	• You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3
	Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the
	Blu-ray Disc jacket and then select the appropriate function.
• The product is not working.	• Press and hold the romote control's STOP ( ) button for 5 seconds in
(Example: The power goes out	STANDBY mode.
or a strange noise is heard.)	- Using the RESET function will erase all stored settings.
• The Product is not working
	Do not use this unless necessary.
normally.
You have forgotten the rating	• With no disc in the product, press and hold the product's STOP ( ) button for
level password.	longer than 5 seconds. INIT appears on the display and all settings will return
	to the default values.
	And then press the POWER button.
	- Using the RESET function will erase all stored settings.
	Do not use this unless necessary.
Can't receive radio broadcasts.	• Is the antenna connected properly?
	• If the antenna's input signal is weak, install an external FM antenna in an area
	with good reception.
While listening to TV audio	• If the EJECT ( ) button is pressed while listening to TV audio using the D. IN or
through the Product, no sound is	AUX functions, the BD/DVD functions are turned on and the TV audio is muted.
heard.
"Not Available" appears on	• The features or action cannot be completed at this time because:
screen.	1. The BD/DVD’s software restricts it.
	2. The BD/DVD’s software doesn’t support the feature (e.g., angles)
	3. The feature is not available at the moment.
	4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a	• Press and hold the STOP ( ) button on front panel for more than 5 seconds
resolution your TV cannot support	with no disc inserted. All settings will revert to the factory settings.
(for example, 1080p), you may not
see a picture on your TV.
No HDMI output.	• Check the connection between the TV and the HDMI jack of the product.
	• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output screen.	• If random noise appears on the screen, it means that TV does not support
	HDCP (High-bandwidth Digital Content Protection).

06 Other Information

English 73

HT-D6730W_XAA_1226.indd 73 2011-12-26 ￿￿ 5:47:07