Samsung SID-600P manual Adjust the Lens direction and assemble the Dome Cover

Page 11

00356A SID-600P-eng 12/10/02 12:14 PM Page 20

Installing the Camera

7) Route the cables through the PIPE assembly hole on the side of the PIPE,

align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS.

E

8) Use a “minus” screwdriver or a coin to turn the CAP BOLT clockwise to fasten it to the PIPE assembly hole at the bottom of the CASE. (Make sure that an O RING (P22 T2.4) is inserted into the CAP-BOLT. If the O RING is not inserted, it will not be waterproof and cause damage to the product.)

9) After arranging the connected power cable and video cable inside the PIPE and then pulling them out, put together the CAMERA’s PIPE assembly screw (3/4” Threaded) and the PIPE’s screw

(3/4” Threaded) to fasten the SET.

 

E

 

 

(*Wrap a TEFLON TAPE around the

 

 

threaded area of the PIPE to make the

 

 

connection watertight, and make sure

 

 

that the cables are not caught by the

 

 

fastening area.)

 

 

10) Adjust the LENS direction and assemble the DOME COVER.

 

 

(Refer the steps 6 to 8 of the ceiling installation for LENS adjustment and

 

DOME COVER assembly.)

 

 

How to switch the top and bottom of the screen if

180º

 

 

 

installing the DOME COVER facing up Loosen the

 

 

STOPPER-RING, remove the COVER-LENS, and

 

 

rotate the LENS body 180 degrees so that the

 

 

BOTTOM mark is pointing downward. Put the

 

 

COVER-LENS back on, position the LENS in the

 

 

direction you want, and then turn the STOPPER-

 

 

RING clockwise to tighten it.

 

 

20

21

Image 11
Contents SID-600P Risk of Electric Shock do not Open Important Safety InstructionsChapter Overview Table of ContentsIntroduction Part Names and Functions Now, let’s install the Camera and connect cables Installing the CameraUsual operation mode Checking the Contents of the Package Before InstallationThese items are sold separately Precautions for Installation and UseInstallation Examples It can be directly installed on ceilingsVideo Cable Preparing Cables Installing the CameraFor installing directly on a ceiling Power Adapter CableFasten the supplied Assy Screw Machine For installing on a pipeFor installing on a pipe coming down from the ceiling For installing on a horizontal pipe Adjust the Lens direction and assemble the Dome Cover Connecting Cables and Checking Operations Setup Menu Overview Structure of the Setup MenuMeans that there is a submenu Camera Menu OrganizationCamera ID IrisLevel Auto FocusManu Manual Iris SizeMotion ShutterAGC/MOTION AWC White BALATW Set the White BAL menu to ATWSync PhaseSync SpecialStores the Zoom and Focus positions Preset IDPosition SET Exit Motion DETDescription Approx kg/2.2lb Operating Temperature10C ~ +50C 14F~122F
Related manuals
Manual 22 pages 40.61 Kb