Samsung SCQ-041AP manual Mounting the SCQ-041P in a Rack

User’s Guide

Mounting the SCQ-041P in a Rack

The is a standard 19-inch electronic equipment rack. If you intend to mount the SCQ-041P in a rack, do as following:

1.Remove the mounting screws from their holes and align each Rack mounting adaptor vertically along the front edge of the SCQ-041P enclosure.

2.Insert the mounting screws through each mounting adaptor and into the corresponding screw holes on the SCQ-041P.

3.Partially tighten the screws so that they are holding the adaptor loosely in place.

4.Adjust the mounting adaptor the front of the adaptor is flush with the front panel of the SCQ-041P enclosure.

5.Tighten the mounting screws so that the adaptor is firmly attached to the SCQ-041P enclosure. Be careful not to over tighten the screws.

6.Repeat the procedure described above to attach the remaining adaptor to the other end of the SCQ-041P enclosure.

POWER ON

OFF

DIGITAL
COLOR	QUAD
SCQ-		SWITCHER
	041P

AUTO SWITCHER

SINGLE	DISPLAY
1	2
3	4

QUAD DISPLAY

12

34

	FREEZE
1		2
3	CHARACTER
	SELECT	4
		MENU

SYSTEM	SETUP
	SETUP
	ENTER

ALARM RESET

LIST

10