Samsung SCQ-041AP manual Configuring the SCQ-041P, Main Menu

User’s Guide

Chapter 4, Configuring the SCQ-041P

In accordance with the above procedure, you can proceed to configure system operation once you finish connecting the other components to the SCQ-041P. To proceed with system configuration, you must access the system setup mode to use the setup menu. The system setup procedure is as follows.

1.Check all power connections to the SCQ-041P and power the system on.

2.Press the “SETUP” button and the green light over the LED on the button come on. Now you can see the system setup main menu on the quarter section screen as illustrated below.

<MAIN MENU>

→1. CHANNEL TITLE SET

2.DATE/TIME SET

3.DISPLAY MODE SET

4.ALARM SET

5.AUTO SWITCHER SET

6.LOSS DETECT SET

If you press the “MENU” button located on the front of the system, you can move the “ ” mark. If you press the “SETUP” button, the main menu disappears and the LED light simultaneously goes off. You can then return to the previous mode from the setup mode.

3. Now you can configure each feature in the main menu.

16