Patton electronic 1088/K user manual Installation, Configuring The Hardware Dip Switches, On Off

3.0 INSTALLATION

The Model 1088/K is equipped with two sets of eight DIP switches, which allow configuration of the unit for a wide variety of applications. This section describes switch locations and explains all possible configurations.

3.1 CONFIGURING THE HARDWARE DIP SWITCHES

The 16 external switches are grouped into two eight-switch sets, and are externally accessible from the underside of the Model 1088/K (See Figure 1).

Figure 1. Underside of Model 1088/K showing location of DIP switches

The two sets of DIP switches on the underside of the Model 1088/K will be referred to as S1 and S2. As Figure 2 shows, the orientation of all DIP switches is the same with respect to “ON” and “OFF” positions.

ON

OFF

Figure 2. Close-up of configuration switches (all sets are identical in appearance)

7