Patton electronic 1088/K Appendix A, A.1 CLOCKING MODES, A.2 DTE RATE, A.3 DIAGNOSTICS, A.6 POWER

APPENDIX A

SPECIFICATIONS

A.1 CLOCKING MODES

Network (G.703)

A.2 DTE RATE

All 64k steps from 64 to 2048 kbps

A.3 DIAGNOSTICS

V52 compliant (511/511E) pattern generator and detector with error injection mode. Remote Loopback (toward DSL line) and local loopback (toward G.703 network) control by a single front panel switch

A.4 LED STATUS

The following LEDs are displayed on the front panel:

•DSL Link (Green Active) - DSL Link Active

•E1 Link (Green Active) - Valid G.703/G.704 connection

•LOS (Red Active) - E1 loss of framing

•NS (Red Active) - No signal DSL Link

•ER (Flashing Red) - CRC error during nor-mal operation, bit error dur- ing pattern gen-eration test

•TM (Active Yellow) - Test Mode Enabled

A.5 CONFIGURATION

Externally accessible dip switches or SNMP managed through 1095RC

A.6 POWER

5 VDC from external desk top power supply, 90-260VAC, 50-60 Hz (Uni- versal Input), 10W or -48 VDC

A.7 COMPLIANCE

FCC Part 15, CE, CTR12, CRTR13 Transmission Line: Single Twisted Pair

26