Fortinet Version 3.0 manual Connectors, Factory default configuration

FortiBridge unit basic information Setting up FortiBridge units

Connectors

Table 5: FortiBridge-1000 connectors

Connector	Type		Speed		Protocol		Description
INT 1	RJ-45		10/100/1000		Ethernet		Copper gigabit ethernet connection to the internal
			Base-T				network.
EXT 1	RJ-45		10/100/1000		Ethernet		Copper gigabit ethernet connection to the
			Base-T				external network.
INT 2	RJ-45		10/100/1000		Ethernet		Copper gigabit ethernet connection to the
			Base-T				FortiGate unit internal interface.
EXT 2	RJ-45		10/100/1000		Ethernet		Copper gigabit ethernet connection to the
			Base-T				FortiGate unit external interface.
CONSOLE	RJ-45		9600 bps		RS-232		Optional connection to the management
					serial		computer.
							Provides access to the command line interface
							(CLI).
Table 6: FortiBridge-1000F connectors
Connector		Type		Speed		Protocol		Description
INT 1, INT 2,		LC SFP		1000Base-SX		Ethernet		Multimode fiber optic connections
EXT 1,								to gigabit optical networks. The
EXT 2, and								FortiBridge-1000F is shipped with
management								4 1000Base-SX Small Formfactor
								Pluggable (SFP) transceivers that
								you must insert into the INT 1, INT
								2, EXT 1, and EXT 2 sockets on
								the back panel. The management
								connection is optional.
CONSOLE		RJ-45		9600 bps		RS-232		Console connection to the
						serial		command line interface (CLI).

Factory default configuration

Table 7: FortiBridge-1000 and 1000F unit factory default network configuration

Administrator account	admin
Password	(none)
Management IP/Netmask	192.168.1.99/255.255.255.0
Management Access	Telnet, SSH and ping access to the INT 1
	interface. No management access to the EXT 1
	interface.
Routes	(none)
Primary DNS	65.39.139.53
Secondary DNS	65.39.139.63

22	FortiBridge Version 3.0 Administration Guide
	09-30000-0163-20061109