system global | config CLI commands |
system global
Use this command to configure global settings that affect various FortiBridge systems and configurations.
Command syntax pattern
config system global
set <keyword> <variable> end
config system global unset <keyword>
end
get system global show system global
Keywords and variables | Description | Default |
|
|
|
admintimeout | Set the administrator idle timeout to control the | 5 |
<minutes_integer> | amount of inactive time before the administrator must |
|
| log in again. The maximum admintimeout is 480 |
|
| minutes (8 hours). To improve security keep the idle |
|
| timeout at the default value. |
|
|
|
|
dst {disable enable} | Enable or disable daylight saving time. | disable |
| If you enable daylight saving time, the FortiBridge unit |
|
| adjusts the system time when the time zone changes |
|
| to daylight saving time and back to standard time. |
|
|
|
|
heartbeat {disable | For future use. | disable |
enable } |
|
|
hostname <name_str> | Type a name for this FortiBridge unit. | FortiBridge model |
|
| name. |
This command is only available for the | auto | |
100half 10full | Set the network interface speed or allow each |
|
10half auto } | interface to |
|
| auto, each FortiBridge network interface will |
|
| autosense the correct speed and adjust accordingly. If |
|
| the |
|
| speed, all FortiBridge interfaces are locked to the |
|
| selected speed. |
|
| Although the FortiBridge supports 10/100/1000mbps |
|
| speeds when set to auto, 1000half and 1000full are |
|
| not available for manual selection. |
|
| Some early units will return an Not supported by this |
|
| hardware error when this command is invoked. This is |
|
| normal as hardware support for |
|
| was only added in later units. |
|
ntpserver {<name_str> | Enter the domain name or IP address of a Network | 132.246.168.148 |
<address_ipv4>} | Time Protocol (NTP) server. |
|
ntpsync {disable | Enable or disable automatically updating the system | disable |
enable} | date and time by connecting to a Network Time |
|
Protocol (NTP) server. For more information about |
| |
| NTP and to find the IP address of an NTP server that |
|
| you can use, see http://www.ntp.org. |
|
|
|
|
66 | FortiBridge Version 3.0 Administration Guide |
