![](/images/new-backgrounds/1187354/18735471x1.webp)
Configuring FortiBridge probes | Configuration and operating procedures |
Figure 13: Example FortiBridge application
(Normal mode)
Internal network
INT 1
INT 2
Internal
EXT 1 | Internet |
EXT 2 | Router |
External |
|
Mail server
Syslog server SNMP Manager (Transparent mode)
Table 9 lists the internal network configuration.
Table 9: Internal network configuration
FortiGate management IP address | 172.20.120.10/24 |
|
|
Internal network subnet IP address | 172.20.120.0/24 |
|
|
Router internal IP address | 172.20.120.1/24 |
|
|
Internal network default route | 172.20.120.1 |
|
|
Primary DNS server | 172.20.120.2 |
|
|
Secondary DNS server | 172.20.120.3 |
|
|
Syslog Server IP address | 172.20.120.11 |
|
|
SNMP Manager IP address | 172.20.120.12 |
|
|
Mail Server Name | mail.myorg.com |
|
|
Table 10 lists the basic FortiBridge unit configuration settings.
Table 10: Basic FortiBridge unit configurations settings
Administrator password | passWORD |
|
|
Management IP address | 172.20.120.20/24 |
|
|
Default route | 172.20.120.1 |
|
|
Primary DNS server | 172.20.120.2 |
|
|
Secondary DNS server | 172.20.120.3 |
|
|
Configuring FortiBridge probes
To monitor a FortiGate unit for failure, you configure the FortiBridge unit to send probe packets through the FortiGate unit. Using probe packets, the FortiBridge unit can confirm that the FortiGate unit can process ICMP (ping), HTTP, FTP, POP3, SMTP, and IMAP traffic. Until you configure probes, the FortiBridge unit cannot detect if the FortiGate unit has failed.
36 | FortiBridge Version 3.0 Administration Guide |