Using DMM/ADMM Commands
ATM QSAAL The following command displays information about ATM QSAAL Parameters parameters for an ATM Backbone SwitchModule in slot 4 of a
CoreBuilder 5000 hub:
CB5000> show atm 4 qsaal
Slot | Module | Version | Network | General Information |
04 | 3.0 | N/A |
|
|
|
|
| Current | Next Reset |
|
|
|
| ||
Poll | Timer | (msecs): | 100 | 100 | |
Keepalive Timer (secs): | 1 | 1 | |||
No Response | Timer (secs): | 300 | 300 | ||
Idle | Timer | (secs): | 15 | 15 | |
CC Timer (secs): | 2 | 2 | |||
Max | CC | Retries: | 4 | 4 | |
Max | PD | Retries: | 25 | 25 | |
Stat | Max Ranges: | 67 | 67 |
ATM Signal The following command displays information about the ATM signal Configuration configuration for an ATM Backbone SwitchModule in slot 4 of a
CoreBuilder 5000 hub:
CB5000> show atm 4 signal_configuration
Slot | Module | Version | Network | General Information |
04 | 3.0 | N/A |
|
| Current | Next Reset |
| ||
Sig PVC: | 0/5 | - |
Sig Peak Cell Rate (% line rate):5 | 5 | |
Sig Sust Cell Rate (% line rate):1 | 1 | |
Sig Max Burst Size (cells): | 11 | 11 |