3Com 5000 ATM manual Transcend Network Control Services for Unix

3-2CHAPTER 3: CONFIGURING THE ATM BACKBONE SWITCHMODULE

Distributed The CoreBuilder 5000 Distributed Management Module (DMM) and Management Module Advanced DMM (ADMM) provide commands that allow you to

configure and monitor the ATM Backbone SwitchModule.

The ATM Backbone SwitchModule requires DMM/ADMM Version v5.20 or later.

DMM access to the ATM Backbone SwitchModule is obtained in either of two ways:

■Connect a terminal directly to the console port of the DMM

■TELNET to the IP address of the DMM from which the ATM Backbone SwitchModule is accessible

Refer to Setting Up DMM Access later in this chapter for more information.

Advanced This section identifies the advanced management tools that are Management Tools available for managing CoreBuilder 5000 ATM Backbone

SwitchModules, including:

■Transcend Network Control Services for UNIX

■Transcend Network Management Software for Windows

■Third-Party SNMP-Based Tools

Transcend Network Control Services for UNIX

3Com Transcend® Network Control Services for UNIX provides a suite of advanced graphical tools for network management. Figure 3-1 illustrates the Transcend UNIX graphical tools you can use to configure CoreBuilder 5000 ATM Backbone SwitchModules.