Using DMM/ADMM Commands
Displaying Detailed Vbridge Configuration Information
The following command shows detailed vbridge configuration information about an ATM Backbone SwitchModule in a CoreBuilder 5000 hub:
CB5000> show vbridge all configuration verbose
Interface | Number: |
|
| 4 | |
Interface | Mode: |
|
| ENABLED | |
Aging Time: |
|
|
| 300 | |
Learned Entry | Discards: | 0 | |||
Spanning | Tree | Priority: | 32768 | ||
Spanning | Tree | Bridge | Max Age: | 20.00 | |
Spanning | Tree | Bridge | Forward Delay: | 15.00 | |
Spanning | Tree | Bridge | Hello Time: | 2.00 | |
Spanning | Tree | Hold | Time: | 1.00 | |
Spanning | Tree | Max | Age: | 20.00 | |
Spanning | Tree | Hello | Time: | 2.00 | |
Spanning | Tree | Forward Delay: | 15.00 | ||
Designated | Root: | ||
Root | Cost: |
| 102 |
Root | Port: |
| 289 |
Topology Changes: | 302 | ||
Time | Since | Topology Changed: | 1358.83 |
IGMP | Snooping Mode: | ENABLED | |
