3Com 5000 ATM manual About this Guide

4ABOUT THIS GUIDE

■CoreBuilder 5000 Integrated System Hub Installation and Operation Guide — Provides information on the installation, operation, and configuration of the CoreBuilder 5000 Integrated System Hub. This guide also describes the principal features of the CoreBuilder 5000 Fault-Tolerant Controller Module.

■CoreBuilder 5000 Distributed Management Module User Guide — Provides information on the CoreBuilder 5000 Distributed Management Module’s operation, installation, and configuration. This guide also describes the software commands associated with the Distributed Management Module.

■CoreBuilder 5000 Distributed Management Module Commands Guide — Describes each management command by providing details on command format and use.

For a complete list of 3Com documents, contact your network supplier.

Reference Documents This section includes the following types of reference documents:

■SNMP and MIB-Based Information

■ATM and LAN Documents

SNMP and MIB-BasedThe following documents supply related background information on Information SNMP and networking protocols:

■Case, J., Fedor, M., Schoffstall, M., and J. Davin, The Simple Network Management Protocol, RFC 1157, University of Tennessee at Knoxville, Performance Systems International and the MIT Laboratory for Computer Science, May 1990.

■Rose, M., and K. McCloghrie, Structure and Identification of Management Information for TCP/IP-based Internets, RFC 1155, Performance Systems International and Hughes LAN Systems, May 1990.

■Rose, M. and McCloghrie, K., Management Information Base for Network Management of TCP/IP-Based Internets: MIB-II, RFC 1213, Performance Systems International and Hughes LAN Systems, March 1991.

■Decker, E., Langille, P., McCloghrie, K., and Rijsinghani, A., Definitions of Managed Objects for Bridges, RFC 1493, Cisco Systems, Inc., Digital Equipment Corporation, and Hughes LAN Systems, July 1993.