
SHOW VBRIDGE Use the SHOW VBRIDGE command to display the following vbridge configuration information about the ATM Backbone SwitchModule:
■General vbridge configuration information
■Detailed vbridge configuration information
■IGMP snooping information on a vbridge
Displaying General Vbridge Configuration Information
The following command shows general vbridge configuration information about an ATM Backbone SwitchModule in a CoreBuilder 5000 hub:
You do not have to enter no_verbose to see the general information.
CB5000> show vbridge all configuration no_verbose
VBridge | Bridge Identifier | Ports | Spanning Tree General Information | ||
1 | 41 | ENABLED | vbridge_1 |
| |
2 | 2 | ENABLED | vbridge_2 | (root) | |
11 | 3 | ENABLED | vbridge_11 (root) |