4-20 CHAPTER 4: STATUS MONITORING AND STATISTICS
Using Graphical Interface ToolsTran s c e n d ® Network Control Servic es provides advanced graphical
management capabilities that enable you t o monitor ATM Backbone
SwitchModule operation and collect and display statistics. Transcend
Network Control Services graphical management t ools include:
■CoreBuilder 5000 Manager
■Device Management for Hubs
■VLAN Manager
■LANE Manager
You can also use a third-party network management application for
SNMP-based monitoring and analysis.
CoreBuilder 5000
Manager
3Com CoreBuilder 5000 Manager uses the Simple Network
Management Protocol (SNMP) to poll devices f or status, configuration,
and traffic information.
CoreBuilder 5000 Manager monitoring and display functions i nclude:
■Display of hub status
■Display of module and port configuration and st atus
■Display and logging of traffic statistics
■Display and logging of alarm conditions and messa ges (traps)
The ATM Backbone SwitchModule supports the followi ng MIBs:
■MIB II – RFC 1213
■Bridge MIB – RFC 1493
■Interfaces MIB – RFC 1573
■ATM MIB – RFC 1695
■SONET MIB – RFC 1595
■ATM Forum LEC MIB
■IANAIFTYPE MIB
■3Com ISD MIB
For specific information on displaying information and statistics using
CoreBuilder 5000 Manager, refer to the CoreBuilder 5000 Manager
documentation for the platform you are runni ng (UNIX or Windows).