Samsung HW-MS6500/ZG, HW-MS6501/EN, HW-MS6500/EN, HW-MS6501/ZG manual Risoluzione dei problemi

Page 117

10 Risoluzione dei problemi

Prima di contattare l’assistenza, controllare quanto segue.

L’unità non si accende.

Il cavo di alimentazione è collegato alla presa?

;; Collegare la spina del cavo di alimentazione alla presa.

Una funzione non risponde quando viene premuto il tasto.

Èpresente elettricità statica nell’aria?

;; Scollegare la spina del cavo di alimentazione e ricollegarla.

Si verificano interruzioni dell’audio nel modo BT.

;; Consultare le sezioni relative alla connessione Bluetooth, alle pagine 7 e 13.

Non viene riprodotto l’audio.

La funzione Muto è attiva?

;; Premere il tasto VOL per annullare la funzione.

Il volume è impostato al minimo?

;; Regolare il volume.

Il telecomando non funziona.

Le batterie sono esaurite?

;; Sostituirle con batterie nuove.

La distanza tra il telecomando e l’unità principale della Soundbarè troppa?

;; Avvicinare il telecomando all’unità principale della Soundbar.

Impossibile collegarsi alla TV.

In caso di collegamento tramite rete cablata

;; Verificare che il cavo sia stato collegato correttamente. (Leggere nuovamente il nome della porta per assicurarsi che il cavo sia collegato alla porta corretta.)

(Vedere la pagina corrispondente a ciascun metodo di collegamento.)

;; Premere il tasto (Sorgente) sul lato destro della Soundbar o sul telecomando per verificare che la modalità sia corretta.

In caso di collegamento tramite rete wireless ;; Collegamento tramite Bluetooth

1.Attivare la modalità “BT PAIRING” (associazione Bluetooth) della Soundbar, quindi utilizzare la TV per effettuare nuovamente la ricerca. (Vedere pagina

7 per ulteriori dettagli.)

;; Collegamento tramite Wi-Fi

1.Controllare che il modello di TV sia compatibile.

•• Questa funzione è compatibile solamente con Samsung smart TVs rilasciate dopo il 2014.

2.Controllare che la TV sia collegata alla rete Wi-Fi.

•• Nel caso in cui la TV non sia collegata alla rete Wi-Fi, utilizzare il menu di rete sulla TV per stabilire un collegamento. (Fare riferimento al manuale utente della TV.)

ITA - 23

Image 117
Contents HW-MS6500 / HW-MS6501 Safety Warnings Safety InformationAbout this Manual PrecautionsContents Using the Remote Control Installing the Wall MountSpecifications Checking the Components Power CordSoundbar Main Unit Holder-CableProduct Overview Volume PowerFront Panel / Right Side Panel of the Soundbar Bottom Panel of the SoundbarConnecting Electrical Power Connecting the SoundbarMethod 1. Connecting with a Cable Connecting to your TVConnecting using an Optical Cable Auto Power LinkConnecting a TV using an Hdmi Cable Bottom of the SoundbarRight Side Soundbar Connecting a TV via Bluetooth Method 2. Connecting WirelesslyWhat are the BT Ready and BT Pairing statuses? Initial connectionConnecting via Wi-Fi Disconnecting the Soundbar from the TVPre-connection Checklist Connecting the Soundbar to Wi-Fi Configuring Settings on the TVFor TVs released Soundbar+Surround Speaker Settings Multiroom LinkConnecting using an Optical or Analogue Audio AUX Cable Connecting an External DeviceOptical Cable Audio AUX CableExternal Device  HdmiMethod 1. Connecting via Bluetooth Connecting a Mobile DeviceBluetooth device If the device fails to connectMobile device Method 2. Connecting via Wi-Fi Wireless NetworkSoundbar How to Use the Remote Control Using the Remote ControlAnynet+ / Auto Power Link BT Pairing mode SourceRepeat Music SkipMute Adjusting the Soundbar volume with a TV remote controlInstallation Precautions Installing the Wall MountWallmount Components Wall Mount Guide Holder-Screw 2 EACentre Line Assembling the Holder-Cable Software Update Installing the Holder FootPlace Soundbar Troubleshooting Open Source Licence Notice LicenceImportant Notes About Service Specifications and GuideSpecifications Press Wi-Fi Setup button on the product for Seconds to turn Wi-Fi/Ethernet On / OffENG Sicherheitsinformationen Über Dieses Handbuch HinweiseProduktübersicht Überprüfen der KomponentenAnschliessen der Soundbar Anschluss an ihr FernsehgerätVerwenden der Fernbedienung Installieren der WandhalterungSoftwareaktualisierung Fehlerbehebung Lizenz Technische daten01 Überprüfen der Komponenten Soundbar-HauptgerätKabelhalter Vorderseite / rechte Seite der Soundbar ProduktübersichtUnterseite der Soundbar Rechte Seite der SoundbarStromanschluss Anschliessen der SoundbarStromkabel Stromanschluss Unterseite des Soundbar-HauptgerätsAnschluss an ihr Fernsehgerät Methode 1. Verbindung mit einem KabelVerbindung mit einem optischen Kabel Unterseite der Soundbar Einen Fernseher über ein HDMI-Kabel verbindenWelchen Status haben BT Ready und BT PAIRING? Verbindung eines Fernsehers per BluetoothMethode 2. Drahtlose Verbindung Die erste VerbindungVerbinden über Wi-Fi Checkliste vor der VerbindungsherstellungTrennen der Soundbar vom Fernseher Schritt 2 Konfigurieren von Einstellungen an dem Fernseher Schritt 1 Verbinden der Soundbar mit Wi-FiFür 2017 erschienene Fernseher Für 2016 erschienene FernseherFür 2015 erschienene Fernseher LautsprechereinstellungenFür 2014 erschienene Fernseher Multiroom LinkVerbinden eines Mobilgeräts Optisches KabelAudio AUX-Kabel Über ein HDMI-Kabel verbinden Unterseite der Soundbar Externes Gerät Hdmi Rechte Seite der Soundbar Bluetooth-Gerät Methode 1. Anschließen per BluetoothAnschliessen eines Mobilgeräts Falls das Gerät nicht verbunden werden kannMobilgerät Methode 2. Verbinden über Wi-Fi DrahtlosnetzwerkHinweis So verwenden Sie die Fernbedienung Verwenden der FernbedienungWiedergabe Pause BT/Wi-Fi Modus BT PairingQuelle Oben/Unten Oben/Unten/Links/RechtsStummschaltung Anpassen der Soundbar-Lautstärke mit einer TV-FernbedienungVorsichtsmaßnahmen für die Installation Installieren der WandhalterungMontagehilfe für die Wandhalterung Wandhalterung 2 StckRückseite der Soundbar Rechtes Ende der Soundbar MittellinieZusammenbau des Kabelhalters Platzieren der Soundbar Installieren des HalterfußesFehlerbehebung Lizenz Prüfen Sie, ob die Soundbar mit dem Wi-Fi verbunden istWichtige Hinweise zum Kundendienst Spezifikationen und LeitfadenTechnische daten Bei alle Netzwerk-Ports auf „ON Halten Sie die Wi-Fi Setup Taste am GerätPort Leistungsaufnahme im Standby-Betrieb WPage Informations Relatives À LA Sécurité Propos de ce Manuel PrécautionsPrésentation du Produit Contrôle des ComposantsConnexion de la Soundbar Connexion à votre TéléviseurInstallation du Support Mural Utilisation de la télécommandeComment utiliser la télécommande Spécifications et GuideContrôle des Composants Unité principale SoundbarPorte-câble Panneau avant / Panneau côté droit de la Soundbar 02 Présentation du ProduitPanneau inférieur de la Soundbar Côté droit de la SoundbarConnexion de l’alimentation électrique Connexion de la SoundbarCordon ’alimentationConnexion à votre Téléviseur Méthode 1. Connexion avec un câbleConnexion à l’aide d’un câble optique Connexion d’un téléviseur à l’aide d’un câble Hdmi Brancher sur le port Hdmi in ARC de votre téléviseurPartie inférieure de la Soundbar Que signifient les états BT Ready et BT PAIRING? Connexion à un téléviseur via BluetoothMéthode 2. Connexion sans fil Connexion initialeConnexion via Wi-Fi Déconnexion de la Soundbar à partir du téléviseurListe de contrôle pré-connexion Étape 1 Connexion de la Soundbar au Wi-Fi Étape 2 Configuration des réglages sur le téléviseurPour les téléviseurs sortis en Paramètres haut-parleur Connexion à un Appareil Externe Câble optiqueCâble audio AUX Partie inférieure de la Soundbar Appareil externe Connexion à l’aide d’un câble HdmiAppareil Bluetooth Méthode 1. Connexion via BluetoothConnexion à un Appareil Mobile Si la connexion de l’appareil échoueAppareil mobile Méthode 2. Connexion via Wi-Fi Réseau sans filRemarque Utilisation de la télécommande Comment utiliser la télécommandeClear VOICE, SPORTS, ou Movie DRC Dynamic Range Control Lecture / Pause BT/Wi-Fi Mode BT PairingHaut/Bas Gauche/Droite RépétitionCoupure de son Précautions d’installation Installation du Support MuralComposants de fixation au mur Guide de fixation muraleArrière de la Soundbar Extrémité droite de la Soundbar Montage du porte-câble Installation du pied de support Mise à jour du LogicielMettez la Soundbar en place 10 Dépannage Vérifiez la présence du canal DFS Avis de Licence LibreRemarque Importante à Propos du Service 14 Spécifications et GuideSpécifications Le Bluetooth Appuyez sur le bouton SPK ADD sur le produitPendant 30 secondes pour activer/désactiver Page Norme PER LA Sicurezza Informazioni sulla sicurezzaInformazioni sul manuale PrecauzioniSommario Utilizzo del telecomando Installazione del supporto a pareteCome utilizzare il telecomando SpecificheUnità principale della Soundbar Verifica dei componentiSupporto cavi Vite Per Supporto con piedini Per Supporto caviPanoramica del prodotto Pannello frontale / Pannello laterale destro della SoundbarPannello inferiore della Soundbar Collegamento alla rete elettrica Collegamento della SoundbarCollegamento alla TV Metodo 1. Collegamento mediante un cavoCollegamento tramite un cavo ottico Collegamento di una TV tramite un cavo Hdmi Collegarsi alla porta Hdmi ARC della TVFondo della Soundbar Connessione di una TV mediante Bluetooth Metodo 2. Connessione wirelessCosa sono gli stati BT Ready e BT PAIRING? La connessione inizialeCollegamento tramite Wi-Fi Checklist pre-collegamentoDisconnessione della Soundbar dalla TV Fase 1 Collegare la Soundbar alla Wi-Fi Fase 2 Configurare le Impostazioni sulla TVPer le TV rilasciate nel Impostazioni altoparlanti Collegamento tramite un cavo audio AUX ottico o analogico Collegamento di un dispositivo esternoCavo ottico Cavo audio AUX Hdmi Lato destro della Soundbar Dispositivo esternoDispositivo Bluetooth Metodo 1. Connessione tramite BluetoothConnessione di un dispositivo mobile Se il dispositivo non riesce a connettersiDispositivo mobile Metodo 2. Collegamento tramite Wi-Fi rete wirelessNota Come utilizzare il telecomando Utilizzo del telecomandoSurround Clear VOICE, Sports o MovieRipeti Modo BT PairingSalta brano Destra e SinistraMuto Installazione del supporto a parete Precauzioni per l’installazioneComponenti per il montaggio a parete Retro della Soundbar Estremità destra della Soundbar Linea centraleAssemblaggio del supporto cavi Aggiornamento del software Montaggio del supporto con piediniPosizionare la Soundbar Risoluzione dei problemi Licenza Avviso di Licenza open Source Verificare che la Soundbar sia collegata alla rete Wi-FiNota importante sul servizio Specifiche e guidaSpecifiche Premere il tasto Wi-Fi Setup sul prodotto per Wi-Fi/Ethernet Metodo di disattivazioneSecondi per acceso/spento Wi-Fi/Ethernet Della portaApplicabile nei Paesi con sistemi di raccolta differenziata Contact Samsung World Wide
Related manuals
Manual 162 pages 57.63 Kb Manual 43 pages 56.07 Kb Manual 182 pages 28 Kb Manual 152 pages 63.3 Kb Manual 202 pages 63.96 Kb

HW-MS6500/ZG, HW-MS6501/EN, HW-MS6501/ZG, HW-MS6500/EN specifications

The Samsung HW-MS6500/EN, HW-MS6501/ZG, HW-MS6501/EN, HW-MS6510/XE, and HW-MS6511/XE are part of Samsung's innovative soundbar lineup designed to deliver an immersive audio experience for home entertainment enthusiasts. These soundbars combine sleek design with cutting-edge technology, making them perfect companions for modern TVs while enhancing sound quality.

One of the standout features of these models is their premium 3-channel speaker configuration, which includes a dedicated center channel for clear dialogue and two side speakers to create a surrounding sound field. This configuration elevates TV shows, movies, and music to cinematic levels, allowing users to experience audio as it was meant to be heard. Additionally, the built-in subwoofers provide rich bass without the need for a separate unit, ensuring a clutter-free setup.

Samsung's Acoustic Beam technology is another significant advancement featured in these soundbars. This technology uses precise sound placement to enhance the audio experience by providing expansive sound that appears to come from different directions. This feature is especially beneficial during action-packed scenes, where sound effects and dialogues seem more life-like.

The HW-MS6500 and HW-MS6501 models are equipped with multi-device connectivity options, including Bluetooth and HDMI ARC, enabling seamless pairing with various devices, such as smartphones, tablets, and gaming consoles. This allows users to stream music wirelessly or connect to their home theater systems effortlessly.

Moreover, the Adaptive Sound feature intelligently analyzes the content being played and optimizes audio settings for an enhanced listening experience. Whether it's a quiet drama or a high-octane action movie, these soundbars automatically adjust sound levels to ensure clarity and balance.

With a simple and intuitive design, these Samsung soundbars can be mounted on walls or placed on furniture, easily integrating into any home decor. Their sleek profiles and minimalist aesthetic make them an attractive addition to any entertainment setup.

In conclusion, the Samsung HW-MS6500/EN, HW-MS6501/ZG, HW-MS6501/EN, HW-MS6510/XE, and HW-MS6511/XE soundbars offer exceptional audio quality with features like 3-channel setup, Acoustic Beam technology, multi-device connectivity, and Adaptive Sound. Their combination of innovative technology and stylish designs makes them ideal for enhancing the home entertainment experience, ensuring users enjoy their favorite content like never before.