Samsung HW-MS6501/ZG, HW-MS6501/EN, HW-MS6500/ZG, HW-MS6500/EN manual Troubleshooting

Page 27

10 Troubleshooting

Before seeking assistance, check the following.

The unit will not turn on.

Is the powercord plugged into the outlet?

;; Connect the power plug to the outlet.

A function does not work when the button is pressed.

Is there static electricity in the air?

;; Disconnect the power plug and connect it again.

Sound dropouts occur in BT mode.

;; See the Bluetooth connection sections on pages 7 and 13.

Sound is not produced.

Is the Mute function on?

;; Press the VOL button to cancel the function.

Is the volume set to minimum?

;; Adjust the Volume.

The remote control does not work.

Are the batteries drained?

;; Replace with new batteries.

Is the distance between the remote control and Soundbarmain unit too far?

;; Move the remote control closer to the Soundbar main unit.

Cannot connect to the TV.

If connected via a wired network

;; Check if the cable is connected correctly. (Check the port name to make sure that the cable is connected to the correct port.) (See the corresponding page regarding each connection method.)

;; Press the (Source) button on the right side of the Soundbar or on the remote control to check if the mode is correct.

If connected via a wireless network ;; Connected via Bluetooth

1.Switch the Soundbar to “BT PAIRING” mode, and then use the TV to search

again. (See page 7 for details.) ;; Connected via Wi-Fi

1.Check if the TV is a compatible model.

•• Only Samsung smart TVs released after 2014 are supported.

2.Check if the TV is connected to Wi-Fi.

•• If the TV is not connected to Wi-Fi, use the network menu on the TV to establish a connection. (See the TV user manual.)

ENG - 23

Image 27
Contents HW-MS6500 / HW-MS6501 Safety Warnings Safety InformationAbout this Manual PrecautionsContents Using the Remote Control Installing the Wall MountSpecifications Holder-Cable Power CordChecking the Components Soundbar Main UnitBottom Panel of the Soundbar Volume PowerProduct Overview Front Panel / Right Side Panel of the SoundbarConnecting Electrical Power Connecting the SoundbarAuto Power Link Connecting to your TVMethod 1. Connecting with a Cable Connecting using an Optical CableConnecting a TV using an Hdmi Cable Bottom of the SoundbarRight Side Soundbar Initial connection Method 2. Connecting WirelesslyConnecting a TV via Bluetooth What are the BT Ready and BT Pairing statuses?Connecting via Wi-Fi Disconnecting the Soundbar from the TVPre-connection Checklist Connecting the Soundbar to Wi-Fi Configuring Settings on the TVFor TVs released Soundbar+Surround Speaker Settings Multiroom LinkAudio AUX Cable Connecting an External DeviceConnecting using an Optical or Analogue Audio AUX Cable Optical CableExternal Device  HdmiIf the device fails to connect Connecting a Mobile DeviceMethod 1. Connecting via Bluetooth Bluetooth deviceMobile device Method 2. Connecting via Wi-Fi Wireless NetworkSoundbar How to Use the Remote Control Using the Remote ControlMusic Skip BT Pairing mode SourceAnynet+ / Auto Power Link RepeatMute Adjusting the Soundbar volume with a TV remote controlWall Mount Guide Holder-Screw 2 EA Installing the Wall MountInstallation Precautions Wallmount ComponentsCentre Line Assembling the Holder-Cable Software Update Installing the Holder FootPlace Soundbar Troubleshooting Open Source Licence Notice LicenceImportant Notes About Service Specifications and GuideSpecifications Press Wi-Fi Setup button on the product for Seconds to turn Wi-Fi/Ethernet On / OffENG Sicherheitsinformationen Über Dieses Handbuch HinweiseAnschluss an ihr Fernsehgerät Überprüfen der KomponentenProduktübersicht Anschliessen der SoundbarTechnische daten Installieren der WandhalterungVerwenden der Fernbedienung Softwareaktualisierung Fehlerbehebung Lizenz01 Überprüfen der Komponenten Soundbar-HauptgerätKabelhalter Rechte Seite der Soundbar ProduktübersichtVorderseite / rechte Seite der Soundbar Unterseite der SoundbarStromanschluss Unterseite des Soundbar-Hauptgeräts Anschliessen der SoundbarStromanschluss StromkabelAnschluss an ihr Fernsehgerät Methode 1. Verbindung mit einem KabelVerbindung mit einem optischen Kabel Unterseite der Soundbar Einen Fernseher über ein HDMI-Kabel verbindenDie erste Verbindung Verbindung eines Fernsehers per BluetoothWelchen Status haben BT Ready und BT PAIRING? Methode 2. Drahtlose VerbindungVerbinden über Wi-Fi Checkliste vor der VerbindungsherstellungTrennen der Soundbar vom Fernseher Für 2016 erschienene Fernseher Schritt 1 Verbinden der Soundbar mit Wi-FiSchritt 2 Konfigurieren von Einstellungen an dem Fernseher Für 2017 erschienene FernseherMultiroom Link LautsprechereinstellungenFür 2015 erschienene Fernseher Für 2014 erschienene FernseherVerbinden eines Mobilgeräts Optisches KabelAudio AUX-Kabel Über ein HDMI-Kabel verbinden Unterseite der Soundbar Externes Gerät Hdmi Rechte Seite der Soundbar Falls das Gerät nicht verbunden werden kann Methode 1. Anschließen per BluetoothBluetooth-Gerät Anschliessen eines MobilgerätsMobilgerät Methode 2. Verbinden über Wi-Fi DrahtlosnetzwerkHinweis So verwenden Sie die Fernbedienung Verwenden der FernbedienungOben/Unten Oben/Unten/Links/Rechts Modus BT PairingWiedergabe Pause BT/Wi-Fi QuelleStummschaltung Anpassen der Soundbar-Lautstärke mit einer TV-FernbedienungWandhalterung 2 Stck Installieren der WandhalterungVorsichtsmaßnahmen für die Installation Montagehilfe für die WandhalterungRückseite der Soundbar Rechtes Ende der Soundbar MittellinieZusammenbau des Kabelhalters Platzieren der Soundbar Installieren des HalterfußesFehlerbehebung Lizenz Prüfen Sie, ob die Soundbar mit dem Wi-Fi verbunden istWichtige Hinweise zum Kundendienst Spezifikationen und LeitfadenTechnische daten Leistungsaufnahme im Standby-Betrieb W Halten Sie die Wi-Fi Setup Taste am GerätBei alle Netzwerk-Ports auf „ON PortPage Informations Relatives À LA Sécurité Propos de ce Manuel PrécautionsConnexion à votre Téléviseur Contrôle des ComposantsPrésentation du Produit Connexion de la SoundbarSpécifications et Guide Utilisation de la télécommandeInstallation du Support Mural Comment utiliser la télécommandeContrôle des Composants Unité principale SoundbarPorte-câble Côté droit de la Soundbar 02 Présentation du ProduitPanneau avant / Panneau côté droit de la Soundbar Panneau inférieur de la Soundbar’alimentation Connexion de la SoundbarConnexion de l’alimentation électrique CordonConnexion à votre Téléviseur Méthode 1. Connexion avec un câbleConnexion à l’aide d’un câble optique Connexion d’un téléviseur à l’aide d’un câble Hdmi Brancher sur le port Hdmi in ARC de votre téléviseurPartie inférieure de la Soundbar Connexion initiale Connexion à un téléviseur via BluetoothQue signifient les états BT Ready et BT PAIRING? Méthode 2. Connexion sans filConnexion via Wi-Fi Déconnexion de la Soundbar à partir du téléviseurListe de contrôle pré-connexion Étape 1 Connexion de la Soundbar au Wi-Fi Étape 2 Configuration des réglages sur le téléviseurPour les téléviseurs sortis en Paramètres haut-parleur Connexion à un Appareil Externe Câble optiqueCâble audio AUX Partie inférieure de la Soundbar Appareil externe Connexion à l’aide d’un câble HdmiSi la connexion de l’appareil échoue Méthode 1. Connexion via BluetoothAppareil Bluetooth Connexion à un Appareil MobileAppareil mobile Méthode 2. Connexion via Wi-Fi Réseau sans filRemarque Utilisation de la télécommande Comment utiliser la télécommandeClear VOICE, SPORTS, ou Movie DRC Dynamic Range Control Répétition Mode BT PairingLecture / Pause BT/Wi-Fi Haut/Bas Gauche/DroiteCoupure de son Guide de fixation murale Installation du Support MuralPrécautions d’installation Composants de fixation au murArrière de la Soundbar Extrémité droite de la Soundbar Montage du porte-câble Installation du pied de support Mise à jour du LogicielMettez la Soundbar en place 10 Dépannage Vérifiez la présence du canal DFS Avis de Licence LibreRemarque Importante à Propos du Service 14 Spécifications et GuideSpécifications Le Bluetooth Appuyez sur le bouton SPK ADD sur le produitPendant 30 secondes pour activer/désactiver Page Norme PER LA Sicurezza Informazioni sulla sicurezzaInformazioni sul manuale PrecauzioniSommario Specifiche Installazione del supporto a pareteUtilizzo del telecomando Come utilizzare il telecomandoVite Per Supporto con piedini Per Supporto cavi Verifica dei componentiUnità principale della Soundbar Supporto caviPanoramica del prodotto Pannello frontale / Pannello laterale destro della SoundbarPannello inferiore della Soundbar Collegamento alla rete elettrica Collegamento della SoundbarCollegamento alla TV Metodo 1. Collegamento mediante un cavoCollegamento tramite un cavo ottico Collegamento di una TV tramite un cavo Hdmi Collegarsi alla porta Hdmi ARC della TVFondo della Soundbar La connessione iniziale Metodo 2. Connessione wirelessConnessione di una TV mediante Bluetooth Cosa sono gli stati BT Ready e BT PAIRING?Collegamento tramite Wi-Fi Checklist pre-collegamentoDisconnessione della Soundbar dalla TV Fase 1 Collegare la Soundbar alla Wi-Fi Fase 2 Configurare le Impostazioni sulla TVPer le TV rilasciate nel Impostazioni altoparlanti Cavo audio AUX Collegamento di un dispositivo esternoCollegamento tramite un cavo audio AUX ottico o analogico Cavo ottico Hdmi Lato destro della Soundbar Dispositivo esternoSe il dispositivo non riesce a connettersi Metodo 1. Connessione tramite BluetoothDispositivo Bluetooth Connessione di un dispositivo mobileDispositivo mobile Metodo 2. Collegamento tramite Wi-Fi rete wirelessNota Clear VOICE, Sports o Movie Utilizzo del telecomandoCome utilizzare il telecomando SurroundDestra e Sinistra Modo BT PairingRipeti Salta branoMuto Installazione del supporto a parete Precauzioni per l’installazioneComponenti per il montaggio a parete Retro della Soundbar Estremità destra della Soundbar Linea centraleAssemblaggio del supporto cavi Aggiornamento del software Montaggio del supporto con piediniPosizionare la Soundbar Risoluzione dei problemi Licenza Avviso di Licenza open Source Verificare che la Soundbar sia collegata alla rete Wi-FiNota importante sul servizio Specifiche e guidaSpecifiche Della porta Wi-Fi/Ethernet Metodo di disattivazionePremere il tasto Wi-Fi Setup sul prodotto per Secondi per acceso/spento Wi-Fi/EthernetApplicabile nei Paesi con sistemi di raccolta differenziata Contact Samsung World Wide
Related manuals
Manual 162 pages 57.63 Kb Manual 43 pages 56.07 Kb Manual 182 pages 28 Kb Manual 152 pages 63.3 Kb Manual 202 pages 63.96 Kb

HW-MS6500/ZG, HW-MS6501/EN, HW-MS6501/ZG, HW-MS6500/EN specifications

The Samsung HW-MS6500/EN, HW-MS6501/ZG, HW-MS6501/EN, HW-MS6510/XE, and HW-MS6511/XE are part of Samsung's innovative soundbar lineup designed to deliver an immersive audio experience for home entertainment enthusiasts. These soundbars combine sleek design with cutting-edge technology, making them perfect companions for modern TVs while enhancing sound quality.

One of the standout features of these models is their premium 3-channel speaker configuration, which includes a dedicated center channel for clear dialogue and two side speakers to create a surrounding sound field. This configuration elevates TV shows, movies, and music to cinematic levels, allowing users to experience audio as it was meant to be heard. Additionally, the built-in subwoofers provide rich bass without the need for a separate unit, ensuring a clutter-free setup.

Samsung's Acoustic Beam technology is another significant advancement featured in these soundbars. This technology uses precise sound placement to enhance the audio experience by providing expansive sound that appears to come from different directions. This feature is especially beneficial during action-packed scenes, where sound effects and dialogues seem more life-like.

The HW-MS6500 and HW-MS6501 models are equipped with multi-device connectivity options, including Bluetooth and HDMI ARC, enabling seamless pairing with various devices, such as smartphones, tablets, and gaming consoles. This allows users to stream music wirelessly or connect to their home theater systems effortlessly.

Moreover, the Adaptive Sound feature intelligently analyzes the content being played and optimizes audio settings for an enhanced listening experience. Whether it's a quiet drama or a high-octane action movie, these soundbars automatically adjust sound levels to ensure clarity and balance.

With a simple and intuitive design, these Samsung soundbars can be mounted on walls or placed on furniture, easily integrating into any home decor. Their sleek profiles and minimalist aesthetic make them an attractive addition to any entertainment setup.

In conclusion, the Samsung HW-MS6500/EN, HW-MS6501/ZG, HW-MS6501/EN, HW-MS6510/XE, and HW-MS6511/XE soundbars offer exceptional audio quality with features like 3-channel setup, Acoustic Beam technology, multi-device connectivity, and Adaptive Sound. Their combination of innovative technology and stylish designs makes them ideal for enhancing the home entertainment experience, ensuring users enjoy their favorite content like never before.