Samsung HW-MS6500/ZG manual BT Pairing mode Source, Repeat, Music Skip, Anynet+ / Auto Power Link

Press to select a source connected to the Soundbar.

	•• BT PAIRING mode
Source	To turn on “BT PAIRING” mode in “BT” mode, press and hold the	(Source) button
	for more than 5 seconds. See page 13 for details.

Press the pbutton to pause a music file temporarily.

If you press the button again, the music file plays.

Play / Pause

(BT/Wi-Fi)



Up/Down/

Left/Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

•• Repeat

To use the repeat function, press the Up button.

•• Music Skip

Press the Right button to select the next music file. Press the Left button to select the previous music file.

•• Anynet+ / Auto Power Link

You can turn Anynet+ and Auto Power Link on or off.

Anynet+ and Auto Power Link are controlled by the Right and Left buttons respectively.

––Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with the Samsung TV’s remote control.

Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.

––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.

––Anynet+ / Auto Power Link are set to ON by default.

Automatically optimises sound effects to suit the scene currently playing.

SMART	The mode turns on or off each time the button is pressed.
MODE

SMART MODE

ENG - 17