Samsung HW-K450/EN manual Connecting the Subwoofer to the Main Unit, Id Set

CONNECTING THE SUBWOOFER TO THE MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the main unit.

Main Unit

Subwoofer

The main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the top of the subwoofer stops blinking and glows blue continuously.

cc If the indicator on the top of the subwoofer displays in red or flashes in blue, the subwoofer has not automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.

cc Important: Before you begin, put the battery into the remote. See page 12 for instructions.

1.Plug the power cords of the main unit and subwoofer into an AC wall outlet.

2.Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.

cc The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.

3.Press the button on your remote control for 5 seconds while the main unit is turned OFF.

4.The ID SET message appears on the display of the main unit for a short period of time, and then disappears.

ID SET

5.While the subwoofer's indicator is flashing blue, press the button on your remote control or on the right side of the main unit to turn on the main unit.

6.The connection is complete if the indicator on the top of the subwoofer stops flashing and glows continuously.

cc If the connection process fails, the blue indicator will flash continuously. Go back to Step 2 and start again. Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)

cc For further information, refer to the Web Manual.

· 4 · English