Samsung SCC-C4307P, SCC-C4207P manual Color / BW, AGC Coloer Level, Auto

❙COLOR / BW

COLOR/BW turns IR(Infrared) Filter on or off. In the poor illumination environment, turns IR Filter off to raise the sensitivity to the same level as an black-and-white camera while in the good illumination environment, turns it on to convert to the COLOR mode in the normal screen condition to lower the sensitivity.

✔COLOR

This is the IR Filter ON mode with a normal color screen. You can press the [Enter] key to set the COLOR GAIN LEVEL. And when the AGC function is on, you can set the

AGC COLOER LEVEL.

✔AUTO...

Depending on illumination, it is automatically switched to the COLOR or BW mode. In the poor illumination environment, turns IR Filter off to convert to the Black-and- White mode for better sensitivity and in the good illumination environment, turns it on to convert to the COLOR mode for worse sensitivity. Select AUTO and press [Enter] and the AUTO BW submenu will appear to control the BW level. Depending on ON or OFF, the BURST signal

may output or no. It also sets up the duration for conversion E and the brightness level for the conversion from the COLOR mode to the BW mode. Duration options are 10Sec., 30Sec., 1Min., and 5Min.. In the BW mode, the WHITE BAL menu will be marked --- to make setup unavailable.

CAMERA ID	ON...
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
FOCUS MODE	AF
MOTION DET	OFF
COLOR/BW	COLOR...
PRIVACY	...
SPECIAL	...
PRESET	...
EXIT	QUIT

✔BW...

Press the

ENTER button.

(COLOR)

GAIN	(0)I--------
AGC COLOR	(0)----I----
RET

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	---
WHITE BAL	ATW1
FOCUS MODE	AF
MOTION DET	OFF
COLOR/BW	AUTO...
PRIVACY	OFF
SPECIAL	...
PRESET	...
EXIT	QUIT

Press the

ENTER button.

(AUTO)
BURST	ON
LEVEL	MEDIUM
DURATION	S ---I--- L
RET

This is the IR Filter OFF mode, black-and-white (with the same sensitivity as a black-and-white camera). Select BW...

and press [Enter] and the BW submenu will appear. You may determine to sent out BURST signals by ON or OFF setting in this submenu.

❖WHITE BAL will be marked --- so that setup is unavailable.

- ALARM ON : It sends out signals through the ALARM output

port in the BW mode.

- ALARM OFF : The ALARM output port is synchronized with the

MOTION DET finction regardiess of the COLOR/BW mode.

- BURST ON : The color burst signal is output together with

black and white composite video signal.

BURST OFF : The color burst signal is not output.

- LEVEL : You can set the brightness level that changes from

COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH.

- DWELL TIME : Set the HOLDING time for switching

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	---
FOCUS MODE	AF
MOTION DET	OFF
COLOR/BW	BW...
PRIVACY	OFF
SPECIAL	...
PRESET	...
EXIT	QUIT

Press the

ENTER button.

(BW)

BURST	OFF
RET

between COLOR and BW mode depending the changes in

the amount of light. You can set the HOLDING time to 10sec

(S), 30sec, 60sec, or 300sec( L).

❖ In AUTO mode, AGC will operates in high speed mode, and

you cannot change it manually, as it is indicated by "---".

25 26