Lightolier GV4WA232 dimensions Ordering Information, Options & Accessories, Specifications

Section 6A/Folio P20-60

														GUARDSMAN				GV4WA232
Page 2 of 2										Vandal Resistant Wraparound, 10-5/16" WIDE, 4' OR 8' LENGTH
														SURFACE FLUORESCENT 2 LAMP, T8 OR T12
MODEL NO. GV4WA232120SO											LER = FW - 70			IW - 59	BF - 0.92
											Comparative yearly lighting energy cost per 1000 lumens = $3.43
	coefficient of utilization										typical V.C.P.’s					candlepower
	pfc	20									Room	Mounting Height				angle	end	45	cross
	pcc	80			70			50			Size	Lengthwise Crosswise				0	1482	1482	1482
	pw	70	50	30	70	50	30	50	30			8.5	10	8.5	10	5	1482	1482	1479
	RCR										30x30	61	64	57	62	15	1432	1463	1483
	0	91	91	91	88	88	88	81	81		40x40	58	61	51	56	25	1331	1409	1458
	1	82	79	76	80	77	73	71	69		60x30	62	66	60	65	35	1186	1313	1375
	2	76	69	65	72	68	63	64	59		60x60	55	57	45	50	45	967	1078	1045
	3	68	61	56	67	59	54	56	52		100x100	53	54	40	43
																55	541	615	568
	4	64	55	47	61	53	46	51	45
																65	305	329	388
	5	58	48	42	56	47	51	45	40
																75	162	208	292
	6	54	44	38	52	42	36	40	35
																85	45	129	251
	7	50	40	34	48	39	33	38	32
																95	0	111	261
	8	46	36	29	45	35	29	34	28
																105	1	147	199
	9	44	34	28	41	33	27	32	26
	10	40	30	25	40	29	25	28	23							115	3	83	107
																125	4	48	62
																135	6	44	57
																145	7	34	47
																155	7	21	32
																165	5	9	15
																175	5	6	7

ORDERING INFORMATION

Explanation of Catalog Number. Example: GV4WA232120SOGLR

GV

GUARDSMAN

VANDAL

RESISTANT

		WA	2
FIXTURE			LAMP			VOLTAGE:				OPTIONS:
LENGTH:			QUANTITY			120 or 277			Add appropriate
4=4 Foot									suffix to catalog
8=8 Foot										no, ie: (GLR)
		FIXTURE			LAMP TYPE/		BALLAST TYPE:
		TYPE:		FIXTURE LENGTH:		2 Lamp Mag. T12		LE
	WA=Wraparound				32=T8			20THD		10THD
		10-5/16" wide			34=T12	2 Lamp Elec. T8		SO*		HI*
					(nominal 48"

or 96") *Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

SCREWDRIVER: For holt head screw. Order Catalog Number LP156737. ELECTRICAL/WIRING OPTIONS Consult factory

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

SPECIFICATIONS

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .79. To reduce glare the VCP shall be not less than 45 either cross- wise or lengthwise (at 100fc level) and the average brightness at 65° shall not exceed 2273 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 73.4%.

MATERIALS: Chassis parts are die formed code gauge cold rolled steel.

FINISH: Multi-stage phosphate treated for maximum corrosion resistance and finish coat high reflectance baked white enamel.

SPECIFICATIONS (continued)

LENS: Prismatic lens is 50% DR (impact resistant) and 50% standard acrylic with a nominal thickness of 1/8", withstands 70 ft. lbs. impact without breaking. SCREWS: Tamper resistant holt head screws secure lens to housing. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902